Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Electrolyt E1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
substance for electrochemical grid marking of metal plates
Manufacturers & Suppliers
ViALUX Messtechnik + Bildverarbeitung GmbH
manufacturer
Am Erlenwald 10, D-09128 Chemnitz, Germany
Emergency Contacts
Emergency Contact
+49 (3 71) 33 42 47-0
monday - friday 8 am - 5 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The main components of the aqueous preparation are shown in the following table.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titriplex III | 6381-92-6 | 3% | Yes |
| Magnesium chloride-hexahydrate | 7791-18-6 | 2% | No |
Notes
These data correspond to (EC) No. 1907/2006, appendix II paragraph 3.2 [1].
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of respiratory emergency move person into fresh air. Consult a physician.
Wash off with plenty of water. Remove contaminated clothing, observing self-protection.
Covering the healthy eye rinse thoroughly with plenty of water for at least 10 minutes while spreading lids widely, consult a physician.
Rinse mouth immediately and spit out. Drink plenty of water (only if the person is conscious). Do induce disgorging. Medical treatment necessary.
Immediate Medical Attention
Medical treatment necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Ambient fire may liberate hazardous vapours or decomposition products. (e. g. nitrous gases). Warming leads to increasing pressure and bursting.
Substance is non-combustible. Select fire and explosion prevention measures according to the surrounding area. In the case of warming or fire cool the container with spray, if possible bring the container out of danger. Stay on the windward side. Use water spray jet to minimise or disperse vapours.
Firefighter Protection
In large-scale leakage indoor wear self-contained breathing apparatus (isolated).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Inform the responsible authorities when very large quantities get into water, drainage, sewer, or the ground.
Do not allow to enter into surface water or drains.
The skin must be cleaned using soap and water or a suitable skin cleaning substance. No solvents or thinners.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
During refilling and transfer use preservatives corresponding to section 8.
During handling and storage keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide ventilation of the room, alkali resistant floor and washing facility. Provide cleaning without possibility of dust formation. Take care to maintain clean working place.
Use protective gloves. The glove material must be sufficiently impermeable and resistant to the substance (e.g. nitrile rubber).
Wear chemical safety goggles.
At emergence of dried solid residues use particle filter P2, colour code white. In case of high concentrations and/or unclear circumstances wear self-contained breathing apparatus.
The protection clothing should be alkali resistant.
Max. allowed emission (total dust) Mass flow ≥ 0,20 kg/h or mass concentration ≥ 20 mg/m³ (Applies only to the dry residue of the aqueous solution.)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
Generally known reactions of water
Strong heating or boiling
Generally known reaction partners of water
In normal use: None; Fire in the vicinity: Nitrous gases (NOx), hydrogen chloride (HCl)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal according to all the relevant provisions of federal, state and local authorities.
Disposal according to all the relevant provisions of federal, state and local authorities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Electrolyt E1?
The signal word is no signal word.
What is the physical form of Electrolyt E1?
Electrolyt E1 is a liquid appearing as form: liquid / color: yellow green with yellow green color. It has neutral odor.
What is Electrolyt E1 used for?
substance for electrochemical grid marking of metal plates
What is the melting point of Electrolyt E1?
The melting point is No data available and the boiling point is No data available.