NextSDS Logo
Safety Data Sheet EN

Solvent BV 305

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Solvent BV 305
Product Code
100134

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Suitable for Paint, Black, HT-AL 9400 (article no. 100133)

Manufacturers & Suppliers

R

Ronmas BV

manufacturer

De Gruisdonk 8, 5928 RT Venlo, The Netherlands

Emergency Contacts

Ronmas BV

+31 77 205 - 7000

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
n-butyl acetate EC: 204-658-1 123-86-4 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible). Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Wash with plenty of water. Take off contaminated clothing and wash it before reuse. Immediately remove any contaminated clothing, shoes or stockings. After contact with skin, wash immediately with plenty of water and soap. Do not wash with: Solvents/Thinner

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist.

Ingestion

Observe risk of aspiration if vomiting occurs. Rinse mouth immediately and drink plenty of water. If swallowed, rinse mouth with water (only if the person is conscious). Call a physician immediately. Put victim at rest, cover with a blanket and keep warm. Do NOT induce vomiting.

Immediate Medical Attention

Call a physician immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray jet, Carbon dioxide (CO2), Foam, Extinguishing powder. alcohol resistant foam, Carbon dioxide (CO2), Extinguishing powder, Water mist

Unsuitable media

Wat. Full water jet.

Specific hazards

Flammable. Vapours can form explosive mixtures with air. Burning produces heavy smoke.

Instructions

In case of fire: Wear self-contained breathing apparatus. Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Wear self-contained breathing apparatus. Use water spray jet to protect personnel and to cool endangered containers.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove all sources of ignition. Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Use personal protection equipment. Keep away from sources of ignition. - No smoking. Ventilate affected area. Avoid breathing dust/fume/gas/mist/vapours/spray.

Environmental

Do not allow uncontrolled discharge of product into the environment.

Cleanup methods

Collect in closed and suitable containers for disposal.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin, eyes and clothes. Avoid: Inhalation of vapours or spray/mists, Inhalation of dust/particles. When using do not eat, drink or smoke. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Never use pressure to empty container. Keep/Store only in original container.

Storage

Keep container tightly closed. Keep in a cool, well-ventilated place. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in accordance with: Betriebssicherheitsverordnung (BetrSichV). Protect from sunlight. Store in a place accessible by authorized persons only.

Hygiene

When using do not eat, drink or smoke.

Fire prevention

Keep away from sources of ignition. - No smoking. Take precautionary measures against static discharges. Vapours can form explosive mixtures with air. Solvent - Vapours are heavier than air, spread along floors and form explosive mixtures with air. Only use the material in places where open light, fire and other flammable sources can be kept away.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. If handled uncovered, arrangements with local exhaust ventilation should be used if possible. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wear suitable gloves. Replace when worn. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. See information supplied by the manufacturer. Suitable material: _____. Breakthrough time (maximum wearing time): _____ min. Use protective skin cream before handling the product.

Eyes

Wear eye/face protection.

Respiratory

In case of inadequate ventilation wear respiratory protection. Respiratory protection necessary at: exceeding exposure limit values. Use suitable breathing apparatus.

Skin/Body

Wear suitable protective clothing.

Environmental

Do not allow to enter into surface water or drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
---
Evaporation Rate
not determined
Metal Corrosion
---
Solidification Point
---
Kinematic Viscosity
---
State Under Standard Conditions
---
Molecular Weight
---
Boiling Point
not determined
Ph
not determined
Odor Threshold
---
Relative Evaporation Rate
---
Upper Explosive Limit
10 vol. %
Appearance
---
Melting Point
not determined
Decomposition Temperature
not determined
Cloud Point
---
Freezing Point
---
Physical State Data
liquid
Explosive Limits
---
Solubility
Not determined
Flash Point
27 °C
Vapor Pressure
not determined
Dynamic Viscosity
---
Solubility In Water
insoluble
Density
0,88 g/cm³
Solubility In Fat
---
Properties Status
---
Lower Explosive Limit
1 vol. %
Form
---
Crystallisation Point
---
Bulk Density
---
Vapor Density
not determined
Odor
characteristic
Partition Coefficient
not determined
Colour
colourless
Auto Ignition Temperature
not applicable
Voc Content
---
Flammability
Solid: not applicable, Gas: not applicable
Colour Intensity
---
Physical State
liquid
Relative Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

Flammable, Ignition hazard.

Hazardous reactions

Exothermic reaction with: Oxidising agent, Strong acid, Strong alkali.

Avoid

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Vapours can form explosive mixtures with air. In case of warming: Formation of: Hazardous decomposition products.

Incompatible

No information available.

Decomposition

Nitrogen oxides (NOx), carbon black, Carbon dioxide (CO2), Carbon monoxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste according to applicable legislation.

Disposal

Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
Paint related material
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Observe employment restrictions for young people. Observe in addition any national regulations!

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Solvent BV 305?

The signal word is warning.

What is the physical form of Solvent BV 305?

Solvent BV 305 is a liquid with colourless color. It has characteristic odor.

What is the solubility of Solvent BV 305?

Not determined

What is Solvent BV 305 used for?

Suitable for Paint, Black, HT-AL 9400 (article no. 100133)

What are the hazard statements for Solvent BV 305?

This substance has 2 hazard statements:

  • H226: Flammable liquid and vapour.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Solvent BV 305?

The melting point is not determined and the boiling point is not determined.