Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KEMTEX PREFILL GAS - SOLVENT 300 ML
- Product Code
- 13.410100-0
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3: Industrial uses, SU22: Professional uses, PC9a: Coatings and paints, thinners, paint removers, PROC7: Industrial spraying, PROC11: Non industrial spraying, Spray varnish
Manufacturers & Suppliers
KEMTEX – H.C.T. nv
national supplier
Europalaan 24b, 9800 DEINZE (Belgium)
+32 9 380 45 43
http://www.kemtex.be
Emergency Contacts
KEMTEX
+31 (0) 598 62 66 66
During normal opening hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Active substance with propellant
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints
Generally the product does not irritate the skin
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
call for medical help immediately
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7
Solvent resistant gloves; Nitrile rubber, NBR; The glove material has to be impermeable and resistant to the product/the substance/the preparation; The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.; The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device; Filter AX/P2
Use protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning Gases
Warning Gases
Warning Gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KEMTEX PREFILL GAS - SOLVENT 300 ML?
The signal word is danger.
What is the physical form of KEMTEX PREFILL GAS - SOLVENT 300 ML?
KEMTEX PREFILL GAS - SOLVENT 300 ML is a aerosol appearing as according to product specification with according to product specification color. It has characteristic odor.
What is the solubility of KEMTEX PREFILL GAS - SOLVENT 300 ML?
Not miscible or difficult to mix
What is KEMTEX PREFILL GAS - SOLVENT 300 ML used for?
SU3: Industrial uses, SU22: Professional uses, PC9a: Coatings and paints, thinners, paint removers, PROC7: Industrial spraying, PROC11: Non industrial spraying, Spray varnish
What are the hazard statements for KEMTEX PREFILL GAS - SOLVENT 300 ML?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurized container: May burst if heated
- H315: Causes skin irritation
- H318: Causes serious eye damage
- H336: May cause drowsiness or dizziness
What is the melting point of KEMTEX PREFILL GAS - SOLVENT 300 ML?
The melting point is Undetermined and the boiling point is -24°C.