Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UHU plus schnellfest (Binder)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives
Manufacturers & Suppliers
UHU GmbH & Co.KG
manufacturer
Herrmannstraße 7, D-77815 Bühl (Baden)
0049-(0)7223-284-0
Emergency Contacts
Emergency Contact
0049-(0)7223284-363/-370
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Adhesive
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight = 700) EC: 500-053-5 | 25068-38-6 | 50 - 100% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Carbon dioxide, Foam, Fire-extinguishing powder
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
UHU plus sofortfest (Binder)
---
UHU plus schnellfest (Härter)
---
UHU plus endfest 300 (Binder)
---
UHU plus sofortfest (Härter)
---
UHU plus endfest 300 (Härter)
---
Rapid Super Plus
UFI: 6X21-205U-D00V-448A
SUPER FAST GLUE - 28 ML / 30 G
UFI: 4W1D-D0PX-3007-M677
Sikadur®-Combiflex® CF adhesive Normal/Rapid (A)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Store in cool, dry place in tightly closed receptacles.
Store in cool, dry place in tightly closed receptacles. Store in a cool location. Store only in the original receptacle. Keep container tightly sealed. Store receptacle in a well ventilated area.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves, Rubber gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not necessary if room is well-ventilated.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Exothermic polymerization. Reacts with amines.
No decomposition if used according to specifications.
amines
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EU guidelines: The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. Contains epoxy constituents. Hazard designation: Xi (Irritant), N (Dangerous for the environment).
Risk phrases: 36/38 (Irritating to eyes and skin), 43 (May cause sensitisation by skin contact), 51/53 (Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment). Safety phrases: 2, 24/25, 26, 28, 29/56, 37/39, 46.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UHU plus schnellfest (Binder)?
The signal word is na: r-phrases.
What is the physical form of UHU plus schnellfest (Binder)?
UHU plus schnellfest (Binder) is a fluid with colourless color. It has amine-like odor.
What is the solubility of UHU plus schnellfest (Binder)?
Not miscible or difficult to mix.
What is UHU plus schnellfest (Binder) used for?
Adhesives
What is the melting point of UHU plus schnellfest (Binder)?
The melting point is Undetermined and the boiling point is >200°C.