NextSDS Logo
Safety Data Sheet EN

Flucon 150 AI

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Flucon 150 AI
Product Form
Refractory castable
Chemical Name
Alumino-silicate

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial refractory application

Uses advised against

No information available

Manufacturers & Suppliers

G

Gouda Refractories

manufacturer

Goudkade 16, 2802 AA Gouda, The Netherlands

+31(0)182591400

Emergency Contacts

Gouda Refractories

+31 (0)1825 91400

8.00- 17.00 h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P280 Wear eye protection/ face protection
P285 In case of inadequate ventilation wear respiratory protection
P302 + P352 IF ON SKIN: Wash with plenty of soap and water
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Aluminum silicate (calcined) 1327-43-1 50% No
Alumina cement 65997-16-2 25% No
Amorphous silica 7631-86-9 10% No
Aluminum oxide 1344-28-1 25% No
Barium sulfate 7727-43-7 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh and dust free area

Skin contact

Wash skin with soap and water. Get medical attention if symptoms occur.

Eye contact

Dust should be flushed with clean water. Contact lenses should not be worn with dust in the air IF IN EYES: Rinse cautiously with water for several minutes. Continue rinsing.

Ingestion

Rinse mouth. Not a normal way of entry. Drink large quantities of water and consult a doctor.

Immediate Medical Attention

Get medical attention if symptoms occur. Consult a doctor if ingested. If symptoms persist, call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

No information available.

Specific hazards

None in particular.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No special environmental precautions required.

Cleanup methods

Shovel or sweep up.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide appropriate exhaust ventilation at places where dust is formed. Prevent dust formation and ensure adequate ventilation/dust extraction.

Storage

Keep in a dry place.

Hygiene

Handle in accordance with good industrial hygiene and safety practice.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne contaminants below the exposure limits.

Hands

No special protective equipment required. Protective gloves are recommended.

Eyes

Safety glasses with side-shields or goggles to prevent dust and particles from entering the eyes.

Respiratory

When workers are facing concentrations above the exposure limit (dust) they must use appropriate certified respirators.

Skin/Body

No special protective equipment required.

Environmental

Avoid dust formation

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
---
Physical State
Dry, grey powder
Relative Evaporation Rate
---
Bulk Density
2100 [kg/m³]
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Physical State Data
solid
Density
---
Appearance
Dry, grey powder, no odor
Flash Point
Not applicable
Vapor Density
---
Solubility In Water
Partly
Decomposition Temperature
---
Form
powder
Softening Point
---
Crystallisation Point
---
Properties Status
---
Cloud Point
---
Partition Coefficient
---
Flammability
---
Evaporation Rate
---
Odor Threshold
---
Kinematic Viscosity
---
Colour
grey
Solidification Point
---
Vapor Pressure
---
Solubility In Fat
---
Freezing Point
---
Ph
Not available
Dynamic Viscosity
---
Colour Intensity
---
Boiling Point
Not determine
Odor
no odor
Molecular Weight
---
Auto Ignition Temperature
Does not ignite
Relative Density
---
Solubility
---
Melting Point
>1650 [°C]
Voc Content
---
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions

Reactivity

None under normal processing

Hazardous reactions

None under normal processing

Avoid

None under normal processing; Moisture; may cause lumps

Incompatible

None under normal processing

Decomposition

None under normal processing

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Material can be recycled or disposed according to local regulations

Disposal

Material can be recycled or disposed according to local regulations

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated.
Shipping Name
Not regulated.
Transport Class
Not regulated.
Packing Group
Not regulated.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Flucon 150 AI?

The signal word is no signal word.

What is the physical form of Flucon 150 AI?

Flucon 150 AI is a dry, grey powder appearing as dry, grey powder, no odor with grey color. It has no odor odor.

What is Flucon 150 AI used for?

Industrial refractory application

What is the melting point of Flucon 150 AI?

The melting point is >1650 [°C] and the boiling point is Not determine.