Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- mikrozid AF liquid -INT- 1 | FL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectants and general biocidal products
Manufacturers & Suppliers
Schülke & Mayr GmbH
manufacturer
Robert-Koch-Str. 2, 22851 Norderstedt, Germany
+4940521000
http://www.schuelke.com
Emergency Contacts
UK Poisons Emergency
0870 600 6266
Schülke & Mayr GmbH
+49 (0)40 / 52 100 -0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off with plenty of water. If symptoms persist, call a physician.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Do NOT induce vomiting. Clean mouth with water and drink afterwards plenty of water. Obtain medical attention.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Alcohol-resistant foam, Carbon dioxide (CO2), Water spray jet
High volume water jet
Vapours may form explosive mixtures with air.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid subsoil penetration.
Wipe up with absorbent material (e.g. cloth, fleece). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide sufficient air exchange and/or exhaust in work rooms. Use only in well-ventilated areas.
Store at room temperature in the original container. Do not store at temperatures above 30°C. Keep container tightly closed. Keep away from direct sunlight. Recommended storage temperature: 15 - 25°C
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Splash protection: disposable nitrile rubber gloves e.g. Dermatril (layer thickness: 0,11 mm) made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Nitrile rubber gloves e.g. Camatril (>120 Min., layer thickness: 0,40 mm) or butyl rubber gloves e.g. Butoject (>480 Min., layer thickness: 0,70 mm) made by KCL or gloves from other manufacturers offering the same protection.
Tightly fitting safety goggles
No personal respiratory protective equipment normally required. If the occupational exposure limits cannot be met, in exceptional cases suitable respiratory equipment should be worn only for a short period of time. Recommended Filter type: A-P2 or ABEK-P2 Respiratory protection complying with EN 141.
Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
Vapours may form explosive mixture with air.
Heat, flames and sparks.
Strong acids and oxidizing agents
Decomposition products : No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1987
- Shipping Name
- ALCOHOLS, N.O.S. (Propan-1-ol, Ethanol)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for mikrozid AF liquid -INT- 1 | FL?
The signal word is na: r-phrases.
What is the physical form of mikrozid AF liquid -INT- 1 | FL?
mikrozid AF liquid -INT- 1 | FL is a liquid appearing as liquid with colourless color. It has alcohol-like odor.
What is mikrozid AF liquid -INT- 1 | FL used for?
Disinfectants and general biocidal products
What is the melting point of mikrozid AF liquid -INT- 1 | FL?
The melting point is < -5 °C and the boiling point is ca. 80 °C.