Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ecomab Fibre Textiles
- Product Form
- Article
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For industrial use within high temperature applications.
Uses advised against
No additional information available
Manufacturers & Suppliers
INSULCON N.V.
Haverheidelaan 4, 9140 Temse
+32(0)3 711.02.78
INSULCON B.V.
The Netherlands
+31 (0) 167 56570
INSULCON GMBH
Germany
+49 (0) 2131 408548-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
All products contain AES wool (synthetic fibres, alkaline earth silicate, CAS 436083-99-7) and maximum 20% viscose, CAS 9004-34-6.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| AES wool | 436083-99-7 | --- | No |
| viscose | 9004-34-6 | 20% | No |
Notes
Article. All products contain AES wool (synthetic fibres, alkaline earth silicate, CAS 436083-99-7) and maximum 20% viscose, CAS 9004-34-6.
First Aid Measures
Emergency procedures for chemical exposure incidents
If irritation to nose and throat, move to fresh air.
Symptoms: mechanical irritation
Gently wash with plenty of soap and water.
Symptoms: mechanical irritation
Rinse cautiously with water for several minutes. If eye irritation persists: Get medical advice/attention.
Symptoms: mechanical irritation
Ingestion unlikely. Drink plenty of water.
Immediate Medical Attention
If eye irritation persists: Get medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agent suitable for surrounding combustible materials.
Ecomab textile products can contain viscose (max. 20%). This organic fibre will burn out at a low temperature (aprox. at 200°C). This can cause smoke, however this will happen only once.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prohibit unauthorized persons. Ensure operatives are trained to minimise exposures.
Prevent entry to sewers and public waters. Avoid sub-soil penetration.
Mechanically recover the product.
Related Products
Similar products with comparable safety profiles
Keramab® Ceramic fibre textile products
CAS: 142844-00-6
Basalt fibre components: yarns, rovings, fabrics, non-woven mats.
---
FIBERFRAX Z
CAS: 142844-00-6
Polyfiber
---
Basalt fabrics (dry fabrics, multi-axial fabrics, knitted fabrics,...)
---
Fiberglass paper
---
Continuous Glass Fiber Products, Including Assembled Roving, Direct Roving, Dry Chopped Strands, Wet Chopped Strands, Woven Roving, Stitch Chopped Strand Mat, Power Chopped Strand Mat, Emulsion Chopped Strand Mat, Stitch Combo Mat, Woven Roving Combo Mat, Glass Filament Yarn, Marketable Cake, Cut Strands, Texturized Yarn.
---
System 3 Textile Printing Medium
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Obtain special instructions before use. Avoid contact with skin and eyes. Do not eat, drink or smoke when using this product. Clean contaminated areas thoroughly. Use personal protective equipment as required. Ensure good ventilation of the work station.
Product must only be kept in the original packaging. Store tightly closed in a dry and cool place.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Leather protective gloves
Safety glasses with side shields
In case of insufficient ventilation, wear suitable respiratory equipment. If dust are formed : Short term exposure. (FFP2)
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
Stable under normal conditions of use.
No dangerous reactions known.
No additional information available.
None.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be done according to official regulations. European waste catalogue.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is an article and has not to be classified and labelled according to the current laws and regulations.
A safety data sheet is not required for this product under Article 31 of REACH. This Product Safety Information Sheet has been created on a voluntary basis.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ecomab Fibre Textiles?
The signal word is no signal word.
What is the physical form of Ecomab Fibre Textiles?
Ecomab Fibre Textiles is a white fibre appearing as white fibre .
What is the solubility of Ecomab Fibre Textiles?
Less than 1 mg/l
What is Ecomab Fibre Textiles used for?
For industrial use within high temperature applications.
What is the melting point of Ecomab Fibre Textiles?
The melting point is >1300°C and the boiling point is Not applicable.