Fiber Glass Nonwoven Tissue

Provide the clean air availability, free breathing conditions for an injured person, when breathing in the product dust, glass fibers or products of the binder thermal decomposition. Blow nose to expel the dust and fibers. Rinse Wash mouth cavity with water. If irritation persists, seek medical advice.

Symptoms: Breathing excessive dust and glass fibers causes short term irritation of upper airways (tickle, cough, and hyperemia).

Lay off the clothes contaminated by the product dust and glass fibers. Wash the contaminated skin with mild soap and running water. Do not use hot water since it contributes to dilatation of pores and, consequently, to deeper penetration of the glass fibers into skin. Do not rub or scratch the affected skin areas. Use an adhesive tape to remove the glass fibers from skin. If irritation persists, seek medical advice.

Symptoms: Product dust and glass fibers may cause short term irritation (itching, red spots on skin).

Wash eyes with running water for at least 15 minutes. Do not rub eyes. If irritation persists, seek medical advice.

Symptoms: Product dust and glass fibers may cause short term mycosis of mucous membranes, mechanical irritation (itching) and discomfort.

First aid measures depend on symptoms. Give some water to drink. If abdominal discomfort persists, seek medical advice.

Symptoms: Ingestion of this material is unlikely. When contingency ingestion, discomfort sense in gastrointestinal tract.

Water fog, dry chemical powder, fire extinguishers, sand, and soul.

None.

When combustion or smoldering the product, there is emitted a gas mixture comprising carbon monoxide and carbon dioxide, nitrogen oxides.

In any sustained fire, wear self-contained breathing apparatus and protective fire suit.

Efficient operation of a combined extract and input ventilation system. Avoid emission and breathing the dust of product and glass fibers.

Avoid emission of the product into water bodies, sewage water, and drainage systems.

Collect the product spilled into a container for utilization. Do wet or vacuum cleaning in working areas.

Avoid breathing the dust of product and glass fibers, and formaldehyde. When the combined extract and input ventilation system operates insufficiently well, wear the personal protective equipment for breathing organs (see Section 8).

Keep the packed product in a closed well ventilated dry storage room far away from ignition sources. Avoid ingress of moisture. Keep product in its packaging upright. It is allowed to keep the product at pallets by four layers upwards.

Do not eat, drink, and smoke at a workplace. Wash hands and take a shower after completing a working shift. Clean the contaminated cloths.

Keep away from open flame and sources of ignition.

Every work should be performed under conditions sufficient to minimize the generation of product dust and glass fibers. The working areas should be ventilated well. It is necessary to tidy up a room and to clean the equipment from product dust and glass fibers by wet or vacuum method.

protective gloves. Selection of protective gloves depends on conditions in working areas. If wear scars (puncture holes or contaminations) are observed, substitute the gloves. Protective gloves should meet European standard for gloves EN 420.

It is recommended to wear non-breakable eyeglasses with side shields as a minimal protection. Eyes protection should meet European standard for eye protection EN 166.

If dust is generated and ventilation is inadequate, use respiratory protection equipment. Respiratory protection equipment should meet European respiratory protection standard EN 149.

head-dress, yawned protective clothing with long sleeves and trousers. It is recommended to cover the open skin with a protective cream or ointment as a preventive measure. It is recommended to wear a long sleeved shirts and trousers. Use elastic wrists and leg cuffs to prevent a penetration of glass fibers into shoes, as well gloves.

No special control is required. Avoid emission of the product into water bodies, sewage water, and drainage systems.

The product is under normal conditions of storage and use.

The product is not reactive and does not undergo a hazardous reaction.

Hazardous reactions will not occur.

Avoid open flame sources and a high moisture medium.

Oxidizing substances.

Under continuous combustion conditions there may be released hazardous gases including carbon oxide and carbon dioxide, nitrogen oxides.