Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fiberfrax fibres
- Product Form
- Substance
- Chemical Name
- Aluminosilicate refractory ceramic fibres
Regulatory Identifiers
- CAS Number
- 142844-00-6 Check regulations →
- EC Number
- 650-017-00-8 Check regulations →
- REACH No.
- 01-2119458050-50-000
Identified Uses
For industrial use within high temperature applications
Uses advised against
No additional information available
Manufacturers & Suppliers
INSULCON B.V.
manufacturer
Zilverhoek 4, 4651 SP STEENBERGEN
+31 (0)167-565750
http://www.insulcon.com
INSULCON N.V.
manufacturer
Belgium
+32 (0)3 711.02.78
INSULCON GMBH
manufacturer
Germany
+49 (0)2131-408548-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminosilicate refractory ceramic fibres substance listed as REACH candidate (Nota A) (Nota R) EC: 604-314-4 | 14244-00-6 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: mechanical irritation.
Wash skin with plenty of water. Gently wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.
Symptoms: mechanical irritation.
Rinse cautiously with water for several minutes.
Symptoms: mechanical irritation.
Ingestion unlikely.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable. Use extinguishing media appropriate for surrounding fire. Foam. Dry powder. Carbon dioxide. Water spray.
Do not use a heavy water stream.
Prevent fire-fighting water from entering environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Only qualified personnel equipped with suitable protective equipment may intervene.
Prevent entry to sewers and public waters.
Mechanically recover the product. Minimise generation of dust. Dust can be vacuumed with a vacuum cleaner containing a HEPA (High Efficiency Particulate Air) filter.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear personal protective equipment. Avoid contact with skin and eyes. Do not breathe dust. Clean contaminated areas thoroughly.
Product must only be kept in the original packaging. Store in a well-ventilated place. Store tightly closed in a dry and cool place.
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Separate working clothes from town clothes. Launder separately.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Leather protective gloves
Where excessive dust may result, wear goggles. Safety glasses with side shields. EN 166
If dust are formed : Wear appropriate mask. (FFP3)
Impervious clothing. Do not take working clothes home
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under normal use.
None.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
Not applicable for inorganic substances.
12.5. Results of PBT and vPvB assessment
The substance does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Other adverse effects
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be done according to official regulations.
Recycle or dispose of in compliance with current legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information for FIBERFRAX / Aluminosilicate refractory ceramic fibres.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fiberfrax fibres?
The signal word is danger.
What is the physical form of Fiberfrax fibres?
Fiberfrax fibres is a solid appearing as fibres. with white. color. It has odourless. odor.
What is the solubility of Fiberfrax fibres?
Water: < 1 mg/l
What is Fiberfrax fibres used for?
For industrial use within high temperature applications
What are the hazard statements for Fiberfrax fibres?
This substance has 1 hazard statement:
- H350i: May cause cancer by inhalation
What is the melting point of Fiberfrax fibres?
The melting point is > 1650 °C Fibres and the boiling point is Not available.