Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYFAST
- Product Code
- 40100036, 40100037
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For embedding of materialographic specimens
Manufacturers & Suppliers
Struers ApS
national supplier
Pederstrupvej 84, DK-2750 Ballerup
+45 44 600 800
Emergency Contacts
National Capital Poison Center
1-800-222-1222
Infotrac
1-800-535-5053
Struers US
1-440-871-0071
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move injured person into fresh air and keep person calm under observation. If uncomfortable: Seek hospital and bring these instructions.
Remove contaminated clothing immediately and wash skin with soap and water.
Immediately flush with plenty of water for at least 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Continue flushing during transport to hospital. Bring along these instructions.
Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable seek hospital and bring these instructions.
Immediate Medical Attention
If uncomfortable: Seek hospital and bring these instructions.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
No specific precautions.
When heated and in case of fire, toxic vapors/gases may be formed.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dust. Avoid inhalation of vapors and contact with skin and eyes.
Do not discharge into drains, water courses or onto the ground.
Collect spillage with shovel, broom or the like.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of dust. Avoid contact with skin and eyes. Observe good chemical hygiene practices.
Store in tightly closed original container. Store at room temperature.
Observe good chemical hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of inhalation. Local exhaust is recommended.
Risk of contact: Wear protective gloves. Nitrile gloves are recommended. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material.
Risk of contact: Wear goggles/face shield.
In case of inadequate ventilation and work of brief duration, use suitable respiratory equipment. Use respiratory equipment with combination filter, type A2/P2.
Wear apron or protective clothing in case of contact.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
None under normal conditions. (*)
None under normal conditions. (*)
Avoid dust close to ignition sources.
Avoid contact with acids and oxidizing substances.
When heated and in case of fire, toxic vapors/gases may be formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste and residues in accordance with local authority requirements.
Dispose of waste and residues in accordance with local authority requirements. Note that fully cured material is not considered as hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYFAST?
The signal word is no signal word.
What is the physical form of POLYFAST?
POLYFAST is a solid. appearing as solid. with various colors color. It has phenolic. odor.
What is the solubility of POLYFAST?
Not available.
What is POLYFAST used for?
For embedding of materialographic specimens