Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYFAST
- Product Code
- M1203042
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For embedding of materialographic specimens
Manufacturers & Suppliers
Struers A/S
manufacturer
Valhøjs Allé 176, DK-2610 Rødovre
+45 3670 3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: resin and fillers.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol EC: 203-632-7 | 108-95-2 | 1% | Yes |
| Resin | --- | 30 - 60% | No |
| Fillers | --- | 30 - 60% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move injured person into fresh air and keep person calm under observation.
Remove contaminated clothing immediately and wash skin with soap and water.
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Continue flushing during transport to hospital.
Immediately rinse mouth and drink plenty of water. Keep person under observation.
Immediate Medical Attention
Seek hospital and bring along these instructions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
By heating and fire, toxic vapours/gases may be formed.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dust. Avoid inhalation of vapours and contact with skin and eyes.
Do not discharge into drains, water courses or onto the ground.
Collect spillage with shovel, broom or the like.
Materials: shovel, broom or the like
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of dust. Avoid contact with skin and eyes. Wash hands before breaks and before smoking, eating or drinking. Observe good industrial hygiene practices.
Store in tightly closed original container.
Wash hands before breaks and before smoking, eating or drinking. Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of inhalation of dust. Local exhaust is recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
None specific.
None specific.
By heating and fire, toxic vapours/gases may be formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYFAST?
The signal word is no signal word.
What is the physical form of POLYFAST?
POLYFAST is a solid appearing as black/green or brown granular with powder .
What is the solubility of POLYFAST?
insoluble in water
What is POLYFAST used for?
For embedding of materialographic specimens