Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pyrocast 450 part B
- Product Code
- 02086 - 450B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Liquid refractory component to be mixed with Pyrocast 450 part A.
Uses advised against
Not fit for use in anything related to human consumption.
Manufacturers & Suppliers
Pyrotek Engineering Materials Ltd.
manufacturer
Garamonde Drive Wyndtush, Milton Raynes MK8 8LN UK
+44 (0) 1938 561155
Emergency Contacts
CHEMTREC Outside North America
+1 703 527 3887
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Call a doctor immediately.
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Call a doctor immediately.
In case of eye contact, remove contact lens and rinse immediately with plenty of water. also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Call a doctor immediately.
Rinse mouth. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor immediately.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding fire
Never use water.
Thermal decomposition can lead to release of irritating gases and vapours
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSH/ANIOSH (approved or equivalent) and full protective gear
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.
Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system. Should not be released into the environment.
Ventilate area and wash spill site after material pickup is complete.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation. Remove and wash contaminated clothing before re-use. In case of insufficient ventilation, wear suitable respiratory equipment. When diluting, always add the product to water. Never add water to the product. Be aware the risk of heat release at diluting.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in original container. Do not re-use empty containers. Freezing of the product may have an impact on the efficiency of the suspension agent resulting in a sediment at the bottom of the pail. The product will be difficult to mix.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Mechanical ventilation and local exhaust is recommended.
Impervious butyl rubber gloves.
Tightly filling safety goggles.
In case of insufficient ventilation, wear suitable respiratory equipment. Respirator with a gas filter, E (yellow) for sulphur dioxide.
Long strewed clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
Stable.
Heating in air.
alkali metals. Metals. Zinc. Iron. Aluminium.
Hydrogen, by reaction with metals. Sulfur oxide. Phosphorous Oxide. Carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Should not be released into the environment. It must undergo special treatment, such as at suitable disposal site, to comply with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN0264
- Transport Class
- II
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pyrocast 450 part B?
The signal word is danger.
What is the physical form of Pyrocast 450 part B?
Pyrocast 450 part B is a liquid appearing as aqueous solution with colourless color. It has acidic odor.
What is Pyrocast 450 part B used for?
Liquid refractory component to be mixed with Pyrocast 450 part A.
What are the hazard statements for Pyrocast 450 part B?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage
- May be corrosive to metals
What is the melting point of Pyrocast 450 part B?
The melting point is Not applicable and the boiling point is Not applicable.