Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PROMOSOLV NEO B1
- Product Form
- Mixture
- Product Code
- 050031800
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 69V0-S0MX-T00W-H722
Identified Uses
Cleaning solvent
Uses advised against
No additional information available
Manufacturers & Suppliers
INVENTEC PERFORMANCE CHEMICALS SAS
manufacturer
26 rue des coulons, P.O. Box BP 27, 94363 BRY SUR MARNE, France
+33 (0) 1 49 83 53 00
FRIGOGAZ Climalife kft Hungary
Villányi út 47, 1118 Budaörs, Hungary
(36) 23 431 660
INVENTEC PERFORMANCE CHEMICALS ITALIA S.R.L.
Via Pusterla, 8, 20013 Magenta - Milano, Italia
(39) 02 48 40 12 06
INVENTEC PERFORMANCE CHEMICALS Switzerland
Z.I. Petits Champs 15 Yverdon Sud, CH-1400 Yverdon-les-Bains, Switzerland
41(0) 24 424 80 90
DKF Dehon Kälte-Fachvertriebs GmbH
Robert - Bosch - Strasse 14, 40668 Meerbusch, Germany
+49-2150-7073-0
INVENTEC PERFORMANCE CHEMICALS ESPAÑA
Poligono Industrial Sepes Calle Kepler 10, 46520 Sagunto, Spain
(34) 962 66 36 32
INVENTEC Performance Chemicals Netherlands BV
Van Konijnenburgweg 84, 4612 PL Bergen op zoom, Netherlands
(31) 164 212 840
Emergency Contacts
Emergency Contact
+33 (0) 1 72 11 00 03
24h/24 7j/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-trans-dichloroethylene EC: 205-860-2 | 156-60-5 | 50 - 80% | Yes |
| (1Z)-1-Chloro-2,3,3-trifluoroprop-1-ene EC: 824-458-3 | 1263679-68-0 | 20 - 30% | Yes |
Notes
Full text of H- and EUH-statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Symptoms: May cause drowsiness or dizziness. Harmful if inhaled.
Wash with soapy water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Symptoms: Eye irritation.
Rinse mouth. If you feel unwell, seek medical advice.
Immediate Medical Attention
Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder. Carbon dioxide.
Strong water jet.
May form flammable/explosive vapour-air mixture.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area. Evacuate area.
Prevent entry to sewers and public waters. Avoid release to the environment. Dike and contain spill.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Handle and open container with care.
Store in a well-ventilated place. Keep container tightly closed. Keep away from naked flames/heat.
Do not drink, eat or smoke in the workplace. Always wash your hands immediately after handling this product, and once again before leaving the workplace.
No open flames. No smoking. Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Nitrile-rubber protective gloves
Safety glasses with side shields. Use eye protection according to EN 166, designed to protect against liquid splashes.
Wear appropriate mask. Mask with {0} canister AX
Majority cotton protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
No dangerous reactions known under normal conditions of use.
No dangerous polymerization.
Heat.
Strong bases. Strong acids.
On thermal decomposition (pyrolysis), releases : Hydrofluoric Acid, Carbon oxides (CO, CO2), Perfluoroisobutylene.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or dispose of in compliance with current legislation. Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to a hazardous or special waste collection point.
Recycle or dispose of in compliance with current legislation. Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to a hazardous or special waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains no REACH substances with Annex XVII restrictions, no REACH candidate list substances, no REACH Annex XIV substances, no substances subject to Regulation (EU) No 649/2012, no substances subject to Regulation (EU) No 2019/1021, no substances subject to Regulation (EU) No 1005/2009, no substances subject to Regulation (EU) 2019/1148, no substances subject to Regulation (EC) 273/2004.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PROMOSOLV NEO B1?
The signal word is warning.
What is the physical form of PROMOSOLV NEO B1?
PROMOSOLV NEO B1 is a liquid with colourless. color. It has sweetish. odor.
What is the solubility of PROMOSOLV NEO B1?
Material insoluble in water.
What is PROMOSOLV NEO B1 used for?
Cleaning solvent
What are the hazard statements for PROMOSOLV NEO B1?
This substance has 4 hazard statements:
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of PROMOSOLV NEO B1?
The melting point is Not available and the boiling point is 48 °C.