Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SPEZIAL-SIGNIERFARBE SCHWARZ
- Product Code
- B-100-SFD-SWR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrielle Beschichtung fr Metalloberflchen
Manufacturers & Suppliers
BOWA GmbH
manufacturer
Hlker Feld 5 D-42279 Wuppertal
Emergency Contacts
Emergency Contact
+49 202-2653-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
DRUCKFARBE
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ACETONE EC: 200-662-2 | 67-64-1 | 50 - 100% | Yes |
| Disolol EC: 200-578-6 | 64-17-5 | 12.5 - 20% | Yes |
| reaction mass of: tert-alkyl(C12-C14)ammonium bis[1-[(2-hydroxy-5-nitrophenyl)azo]-2-naphthalenolato(2-)]-chromate t e r t - a l k y l ( C 1 2 - C 1 bis[1-[(2-hydroxy-4-nitrophenyl)azo]-2-naphthalenolato(2-)]-chromate t e r t - a l k y l ( C 1 2 - C 1 bis[1-[[5-(1,1-dimethylpropyl)-2-hydroxy-3-nitrophenyl]azo]-2-naphthalenolato( 2-)]-chromate(1-), tert-alkyl(C12-C14)ammonium [[1-[(2-hydroxy-5-nitrophenyl)azo]-2-naphthalenolato(2-)]-[1-[(2-hydroxy-5-nitro p h e n y l ) a z o ] - 2 - n a p h t h a l e n o l a t o ( 2 - ) ] ] t e r t - a l k y l ( C 1 2 - C 1 [[1-[[5-(1,1-dimethylpropyl)-2-hydroxy-3-nitrophenyl]azo]-2-naphthalenolato(2-) ]-[1-[(2-hydroxy-5-nitrophenyl)azo]-2-naphthalenolato(2-)]]-chromate tert-alkyl(C12-C14)ammonium ((1-(4(or 5)-nitro-2-oxidophenylazo)-2-naphtholato)(1-(3-nitro-2-oxido-5-pentylphenylaz o)-2-naphtholato))chromate(1-) EC: 403-720-7 | 117527-94-3 | 1 - 3% | Yes |
Full text of classification: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
First Aid, decontamination, treatment of symptoms.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Signierfarbe
---
K2764 FK SCHWARZ
CAS: 68186-94-7
KGM36SW GLASUR FARBLOS
UFI: 7S50-300T-K00S-5S7X
99940 GP BLACK 9910175-SCHWARZ
---
KGS1SW GLASUR FARBLOS
UFI: 3N71-X0CU-W00A-GHF9
HERKULA-UltraCoat Spezial farblos matt
---
PC35 - HEMELSBLAAUW (R-106 Farbkrper Schwarz)
---
COLORMATCH 700 BLACK
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values, a suitable respiratory protection must be used.
For prolonged or repeated handling the following glove material must be used: PE (polyethylene) Thickness of the glove material > 0,4 mm ; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374
Wear closely fitting protective glasses in case of splashes.
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1210
- Shipping Name
- Printing ink related material
- Transport Class
- 3
- Packing Group
- II
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SPEZIAL-SIGNIERFARBE SCHWARZ?
The signal word is danger.
What is the physical form of SPEZIAL-SIGNIERFARBE SCHWARZ?
SPEZIAL-SIGNIERFARBE SCHWARZ is a liquid with refer to label color. It has characteristic odor.
What is SPEZIAL-SIGNIERFARBE SCHWARZ used for?
Industrielle Beschichtung fr Metalloberflchen
What are the hazard statements for SPEZIAL-SIGNIERFARBE SCHWARZ?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of SPEZIAL-SIGNIERFARBE SCHWARZ?
The melting point is not applicable and the boiling point is 55 C.