Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TUSCHIERPASTE "ROT / BLAU"
- Synonyms
- EOSOL Tuschierpaste (Dressing paste) "red / blue", Dressing paste (adjusting paste) "red / blue"
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use of processing aids. Process regulator or aid Dye carrier write on metal
Uses advised against
Intermediate (precursor)
Manufacturers & Suppliers
EMIL OTTO Flux- und Oberflächentechnik GmbH
manufacturer
Eltviller Landstrasse 22, D-65346 Eltville-Erbach
+49 6123 7046-0
http://www.emilotto.de
Emergency Contacts
Emergency Contact
00491777879007
24h
Andre Bremser / Betrieblich Verantwortlicher
00496123704628
Mo - Fr 7:30-16:15 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Relevant ingredients: none (according to Regulation (EC) No 1907/2006 (REACH))
No risks worthy of mention.
Notes
Chemical characterization: Dye carrier, Lubricant, lubrifiants and release products, Paint: red / blue. Contains: mineral oil., Fat., Colouring agent, dyestuff (red / blue)
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash with plenty of water. Change contaminated clothing.
Rinse immediately carefully and thoroughly with eye-bath or water.
Observe risk of aspiration if vomiting occurs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Co-ordinate fire-fighting measures to the fire surroundings.
D powder.
The product itself does not burn.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes and clothes.
Do not allow uncontrolled discharge of product into the environment. No special environmental measures are necessary.
Clean contaminated articles and floor according to the environmental legislation.
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
TUSCHIERPASTE "ROT / BLAU"
---
EOSOL Tuschierpaste blau
---
WOLFRAKOTE TOP PASTE
---
Klüberpaste 46 MR 401
---
CHARBONNEL HIGH GRADE ENCRE LITHO DESSIN / HIGH GRADE PASTE TUSCHE
---
CHARBONNEL BATON LITHO / TUSCHE STICK
---
SPEZIAL-SIGNIERFARBE SCHWARZ
---
DUPLI-COLOR Sprayplast Verdünner 375ml
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Inhalation of vapours or spray/mists. Avoid contact with skin and eyes.
Always close containers tightly after the removal of product. Protect from direct sunlight.
Change contaminated clothing. Wash hands before breaks and after work.
Not highly flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Does not contain substances above concentration limits fixing an occupational exposure limit.
Hand protection: EN ISO 374 -CR (polychloroprenes, Chloroprene rubber). Thickness of glove material: : 0,65mm penetration time (maximum wearing period): : >120min. -NBR (Nitrile rubber): Thickness of glove material: : 0,4mm penetration time (maximum wearing period): : >480min. Breakthrough times and swelling properties of the material must be taken into consideration. Take recovery periods for skin regeneration. In the case of wanting to use the gloves again, clean them before taking off and air them well. Use gloves only once. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Before using check leak tightness / impermeability.
Eye protection: not required.
With correct and proper use, and under normal conditions, breathing protection is not required.
For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes).
No special measures are necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stability and reactivity: Yes.
No risks worthy of mention.
No data available
No risks worthy of mention.
No data available
Thermal decomposition can lead to the escape of irritating gases and vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The mixture does not meet classification criteria based on the ecotoxicological properties of its individual components.
12.2. Persistence and degradability
No data available. The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components.
12.3. Bioaccumulative potential
On the basis of existing data about the elimination/degradation and bioaccumulation potential longer term damage to the environment is unlikely.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6. Endocrine disrupting properties
This product does not contain a substance that has endocrine disrupting properties with respect to non-target organisms as no components meets the criteria.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter into surface water or drains. Dispose of waste according to applicable legislation.
Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The receiver of our product is singularly responsible for adhering to existing laws and regulations. The information is based on the present level of our knowledge. It does not, however, give assurance of product properties and establishes no contract legal rights.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TUSCHIERPASTE "ROT / BLAU" known by?
TUSCHIERPASTE "ROT / BLAU" is also known as: EOSOL Tuschierpaste (Dressing paste) "red / blue", Dressing paste (adjusting paste) "red / blue"
What is the hazard signal word for TUSCHIERPASTE "ROT / BLAU"?
The signal word is no signal word.
What is the physical form of TUSCHIERPASTE "ROT / BLAU"?
TUSCHIERPASTE "ROT / BLAU" is a paste, solid with red / blue color. It has characteristic odor.
What is TUSCHIERPASTE "ROT / BLAU" used for?
Industrial use of processing aids. Process regulator or aid Dye carrier write on metal
What is the melting point of TUSCHIERPASTE "ROT / BLAU"?
The melting point is 40-60 °C and the boiling point is 200-350 °C.