NextSDS Logo
Safety Data Sheet EN

TUSCHIERPASTE "ROT / BLAU"

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TUSCHIERPASTE "ROT / BLAU"
Synonyms
EOSOL Tuschierpaste (Dressing paste) "red / blue", Dressing paste (adjusting paste) "red / blue"

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use of processing aids. Process regulator or aid Dye carrier write on metal

Uses advised against

Intermediate (precursor)

Manufacturers & Suppliers

EMIL OTTO Flux- und Oberflächentechnik GmbH logo

EMIL OTTO Flux- und Oberflächentechnik GmbH

manufacturer

Eltviller Landstrasse 22, D-65346 Eltville-Erbach

+49 6123 7046-0

http://www.emilotto.de

Emergency Contacts

Emergency Contact

00491777879007

24h

Andre Bremser / Betrieblich Verantwortlicher

00496123704628

Mo - Fr 7:30-16:15 Uhr

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Dye carrier, Lubricant, lubrifiants and release products, Paint: red / blue

Relevant ingredients: none (according to UK REACH Regulation)

Notes

No risks worthy of mention.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air.

Skin contact

Wash with plenty of water. Change contaminated clothing.

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water.

Ingestion

Observe risk of aspiration if vomiting occurs.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

D powder.

Specific hazards

The product itself does not burn.

Firefighter Protection

Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin, eyes and clothes.

Environmental

Do not allow uncontrolled discharge of product into the environment. No special environmental measures are necessary.

Cleanup methods

Clean contaminated articles and floor according to the environmental legislation.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Inhalation of vapours or spray/mists. Avoid contact with skin and eyes.

Storage

Always close containers tightly after the removal of product. Protect from direct sunlight.

Hygiene

Change contaminated clothing. Wash hands before breaks and after work.

Fire prevention

Not highly flammable.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Does not contain substances above concentration limits fixing an occupational exposure limit.

Hands

Hand protection: EN ISO 374 -CR (polychloroprenes, Chloroprene rubber). Thickness of glove material: : 0,65mm penetration time (maximum wearing period): : >120min. -NBR (Nitrile rubber): Thickness of glove material: : 0,4mm penetration time (maximum wearing period): : >480min. Breakthrough times and swelling properties of the material must be taken into consideration. Take recovery periods for skin regeneration. In the case of wanting to use the gloves again, clean them before taking off and air them well. Use gloves only once. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Before using check leak tightness / impermeability.

Eyes

Eye protection: not required.

Respiratory

With correct and proper use, and under normal conditions, breathing protection is not required.

Skin/Body

Recommendation: For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes).

Environmental

No special measures are necessary.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Paste, solid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
red / blue
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
none - low
Ph
not applicable etc.:
Melting Point
40-60 °C
Boiling Point
200-350 °C
Flash Point
150 °C
Freezing Point
---
Softening Point
not applicable etc.:
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
0-0,1 hPa (at 20 °C)
Vapor Density
---
Relative Density
not determined
Bulk Density
not determined ISO 1183 (A)
Density
0,8 - 0,9 g/cm³
Flammability
not determined
Upper Explosive Limit
not applicable etc.:
Lower Explosive Limit
not applicable etc.:
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not determined ASTM D 2879-86
Solubility
---
Partition Coefficient
not determined
Solubility In Water
Immiscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
10-15 mPa·s
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stability and reactivity: Yes.

Reactivity

No risks worthy of mention.

Hazardous reactions

No data available

Avoid

No risks worthy of mention.

Incompatible

No data available

Decomposition

Thermal decomposition can lead to the escape of irritating gases and vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Based on available data, the classification criteria are not met. The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components (see section 3).

Based on available data, the classification criteria are not met.

12.2. Persistence and degradability

No data available The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components (see section 3).

No data available for the mixture; properties are determined by individual components.

12.3. Bioaccumulative potential

On the basis of existing data about the elimination/degradation and bioaccumulation potential longer term damage to the environment is unlikely.

On the basis of existing data about the elimination/degradation and bioaccumulation potential longer term damage to the environment is unlikely.

12.4. Mobility in soil

The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components (see section 3).

The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components.

12.5. Results of PBT and vPvB assessment

The substances in the mixture do not meet the PBT/vPvB criteria according to UK REACH. This substance does not meet the criteria for classification as PBT or vPvB.

The substances in the mixture do not meet the PBT/vPvB criteria according to UK REACH.

12.6. Endocrine disrupting properties

This product does not contain a substance that has endocrine disrupting properties with respect to non-target organisms as no components meets the criteria. The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components (see section 3).

The product does not contain substances with endocrine disrupting properties.

12.7. Other adverse effects

The ecotoxicological properties of this mixture are determined by the ecotoxicological properties of the single components (see section 3).
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not allow to enter into surface water or drains. Dispose of waste according to applicable legislation.

Disposal

Dispose of waste according to applicable legislation.

Waste Codes

070699 WASTES FROM ORGANIC CHEMICAL PROCESSES; wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics; wastes not otherwise specified EWC
150105 WASTE PACKAGING; ABSORBENTS, WIPING CLOTHS, FILTER MATERIALS AND PROTECTIVE CLOTHING NOT OTHERWISE SPECIFIED; packaging (including separately collected municipal packaging waste); composite packaging EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is TUSCHIERPASTE "ROT / BLAU" known by?

TUSCHIERPASTE "ROT / BLAU" is also known as: EOSOL Tuschierpaste (Dressing paste) "red / blue", Dressing paste (adjusting paste) "red / blue"

What is the hazard signal word for TUSCHIERPASTE "ROT / BLAU"?

The signal word is no signal word.

What is the physical form of TUSCHIERPASTE "ROT / BLAU"?

TUSCHIERPASTE "ROT / BLAU" is a paste, solid with red / blue color. It has characteristic odor.

What is TUSCHIERPASTE "ROT / BLAU" used for?

Industrial use of processing aids. Process regulator or aid Dye carrier write on metal

What is the melting point of TUSCHIERPASTE "ROT / BLAU"?

The melting point is 40-60 °C and the boiling point is 200-350 °C.