Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAFE STEP METAL PRIMER - BASE
- Product Code
- 43265A & 42087A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC9a: Coatings and paints, thinners, paint removers.
Manufacturers & Suppliers
ROCOL
manufacturer
ROCOL House, Swillington, Leeds, West Yorkshire, LS26 8BS, ENGLAND
+44 (0) 113 232 2700
Emergency Contacts
Emergency Contact
+44 (0) 113 232 2600
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous ingredients: = Bisphenol A epichlorohydin polymer
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-METHOXY-2-PROPANOL EC: 203-539-1 | 107-98-2 | 1 - 10% | Yes |
| BISPHENOL A - EPOXY RESIN (REACTION PRODUCT) EC: 500-033-5 | 25068-38-6 | 10 - 30% | Yes |
| 2-METHYLHEXANE-2-ONE | 110-12-3 | 1 - 10% | Yes |
Notes
Ca :?- sensit vit
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so. Seek medical attention if you feel unwell.
Symptoms: Coughing or wheezing.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water. Obtain medical attention if soreness or redness persists.
Symptoms: Irritation and redness at the site of contact.
Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
Symptoms: Irritation and redness. The eyes may water profusely.
Do not induce vomiting. Wash out mouth with water. If conscious, give half a litre of water to drink immediately. Consult a doctor.
Symptoms: Soreness and redness of the mouth and throat.
Immediate Medical Attention
Transfer to hospital for specialist examination (for eye contact); Consult a doctor (for ingestion); Seek medical attention if you feel unwell (for inhalation).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical powder. Carbon dioxide. Alcohol or polymer foam. Use water spray to cool containers.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers.
Mix with sand or vermiculite. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: sand or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure there is sufficient ventilation of the area. Avoid direct contact with the substance.
Store in cool, well ventilated area. Keep container tightly closed.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area. Ensure lighting and electrical equipment are not a source of ignition.
Nitrile gloves. Gloves (solvent-resistant).
Safety glasses with side-shields. Ensure eye bath is to hand.
Self-contained breathing apparatus must be available in case of emergency.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Heat. Sources of ignition.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- Paint
- Transport Class
- 3 (-)
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAFE STEP METAL PRIMER - BASE?
The signal word is na: r-phrases.
What is the physical form of SAFE STEP METAL PRIMER - BASE?
SAFE STEP METAL PRIMER - BASE is a liquid with grey color. It has characteristic odour odor.
What is SAFE STEP METAL PRIMER - BASE used for?
PC9a: Coatings and paints, thinners, paint removers.