Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POR-15 METAL PREP
- Product Code
- 40201, 40204, 40216, 40255, 240201, 240204
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General use
Uses advised against
Do not use for squirting or spraying. Do not use for products which come into direct contact with the skin.
Manufacturers & Suppliers
P.O.R. Products
manufacturer
38 Portman Road, New Rochelle NY 10801, United States
+1 914-636-0700
http://www.porproducts.com
Emergency Contacts
ChemTel Inc.
1-800-255-3924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| water | 7732-18-5 | 80 - 90% | No |
| phosphoric acid ... % | 7664-38-2 | 10 - 30% | Yes |
| trizinc bis(orthophosphate) | 7779-90-0 | 10% | No |
| Alcohols C6-C12 Ethoxylated | 68439-45-2 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol resistant foam, BC-powder, Carbon dioxide (CO2)
Water jet
In case of fire and/or explosion do not breathe fumes. Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Never add water to this product. Do not mix with alkali. Keep away from caustic solutions.
Protect against frost.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
There is no additional information. Release of flammable materials with: Light metals (due to the release of hydrogen in an acid/alkaline medium)
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POR-15 METAL PREP?
The signal word is danger.
What is the physical form of POR-15 METAL PREP?
POR-15 METAL PREP is a liquid with not determined color. It has characteristic odor.
What is POR-15 METAL PREP used for?
General use
What are the hazard statements for POR-15 METAL PREP?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of POR-15 METAL PREP?
The melting point is not determined and the boiling point is 100 °C.