NextSDS Logo
Safety Data Sheet EN

Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.

CAS 64-19-7

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.
Product Code
20104
Chemical Name
Ethanoic acid

Regulatory Identifiers

CAS Number
64-19-7 Check regulations →
REACH No.
01-2119475328-30-XXXX

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

Hunter Boulevard, Magna Park Lutterworth, LE17 4XN

0800 22 33 44

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Skin Corr. Cat. 1A H314

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

Hazard Statements

H226 Flammable liquid and vapour.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 Take precautionary measures against static discharge.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
N/A --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

Immediate Medical Attention

Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: CR (polychloroprene, chloroprene rubber), Thickness of the glove material: 0,13 mm, Breakthrough time: 17 min, Recommended glove articles: VWR 112-0032. By long-term hand contact: Suitable material: CR (polychloroprene, chloroprene rubber), Breakthrough time: - 480 min, Recommended glove articles: VWR 112-2157.

Eyes

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432.

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Metal Corrosion
---
Appearance
---
Odor Threshold
no data available
Voc Content
---
Dynamic Viscosity
1.22 mPa*s (20 C)
Evaporation Rate
no data available
Physical State
liquid
Softening Point
---
Molecular Weight
---
Relative Density
1.05 g/cm (20 C)
Odor
no data available
Solubility In Water
no data available
Solubility
---
Density
---
Flash Point
38.5 C
Physical State Data
liquid
Form
---
Bulk Density
no data available
Auto Ignition Temperature
485 C
Kinematic Viscosity
no data available
Partition Coefficient
no data available
Ph
1.3-1.8 (20 C)
Decomposition Temperature
no data available
Relative Evaporation Rate
---
Vapor Density
no data available
State Under Standard Conditions
---
Upper Explosive Limit
no data available
Freezing Point
17 C
Melting Point
17 C
Lower Explosive Limit
no data available
Colour Intensity
---
Vapor Pressure
no data available
Boiling Point
118 C (1013 hPa)
Cloud Point
---
Solidification Point
---
Flammability
Flammable liquid and vapour.
Crystallisation Point
---
Colour
colourless
Properties Status
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2789
Shipping Name
ACETIC ACID, GLACIAL
Transport Class
8 (3)
Packing Group
II
IMDG

Segregation group: 1

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.?

The signal word is danger.

What is the physical form of Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.?

Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur. is a liquid with colourless color. It has no data available odor.

What is Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur. used for?

General chemical reagent

What are the hazard statements for Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.?

This substance has 2 hazard statements:

  • H226: Flammable liquid and vapour.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Acetic acid glacial AnalaR NORMAPUR ACS, Reag. Ph. Eur.?

The melting point is 17 C and the boiling point is 118 C (1013 hPa).

Compliance Scanner

Scan your compliance