Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Rigicon
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry sector : Other lines of business; Type of use : Auxiliary for the textile industry, auxiliary for the paper industry
Manufacturers & Suppliers
INSULCON B.V.
distributor
Zilverhoek 4, 4651 SP STEENBERGEN, The Netherlands
+31 (0)167-565750
http://www.insulcon.com
KERAMAB N.V.
distributor
Belgium
+32 (0)3 711.02.78
INSULCON GMBH
distributor
Germany
+49 (0) 2162 249 60-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Colloidal suspension of amorphous silica, stabilized in an ACID MEDIUM. Free from crystalline silica. SiO³ content: approx. 30%.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amorphous silica | --- | 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
In the event of symptoms bring the patient to fresh air.
In case of contact with skin wash off immediately with plenty of water. Consult a doctor if skin irritation persists.
Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.
In case of problems seek medical advice and show the package or label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, Foam, Dry powder, Carbon dioxide, Product itself is non-combustible; Fire extinguishing method of surrounding areas must be discussed.
Firefighter Protection
Well closed full protective clothing (coat and pants) including helmet. Use-self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow entry to drains, water courses or soil.
Pick up with liquid binding materials and if necessary fill in containers capable of being locked. Containers in which spilt substance has been collected must be adequately labelled. Clean contaminated floors and objects thoroughly, observing environmental regulations.
Materials: liquid binding materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation of working area (local exhaust ventilation if necessary). Wear respiratory protection when spraying.
Protect against frost. The product after freezing is no longer usable. Keep container tightly closed and dry in a cool, well-ventilated place.
Observe the general rules of industrial fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See chapter 7; no measures exceeding the ones mentioned are necessary.
For short-term exposure (splash protection): Nitrile rubber gloves. Minimum breakthrough time / gloves: > 10 min. Minimum thickness / gloves > 0,4 mm. These types of protective gloves are offered by various manufacturers. Please note the manufacturers’ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Tightly fitting safety glasses.
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
When handled and stored appropriately no dangerous reactions are known.
When handled and stored appropriately no dangerous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Neutralize
Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product does not require a hazard warning label in accordance with EC Directives.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Rigicon?
The signal word is no signal word.
What is the physical form of Rigicon?
Rigicon is a liquid appearing as liquid, milky white, odourless with milky white color. It has odourless odor.
What is Rigicon used for?
Industry sector : Other lines of business; Type of use : Auxiliary for the textile industry, auxiliary for the paper industry