Rigicon

In the event of symptoms bring the patient to fresh air.

In case of contact with skin wash off immediately with plenty of water. Consult a doctor if skin irritation persists.

Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.

In case of problems seek medical advice and show the package or label.

Water spray jet, Foam, Dry powder, Carbon dioxide. Product itself is non-combustible; Fire extinguishing method of surrounding areas must be discussed.

Do not allow entry to drains, water courses or soil.

Pick up with liquid binding materials and if necessary fill in containers capable of being locked. Containers in which spilt substance has been collected must be adequately labelled. Clean contaminated floors and objects thoroughly, observing environmental regulations.

Materials: liquid binding materials

Wear respiratory protection when spraying.

Keep only in unopened original container. Protect against frost. Keep container tightly closed and dry in a cool, well-ventilated place.

Observe the general rules of industrial fire protection.

See chapter 7; no measures exceeding the ones mentioned are necessary.

For short-term exposure (splash protection): - Nitrile rubber gloves. - Minimum breakthrough time / gloves: > 10 min - Minimum thickness / gloves > 0,4 mm These types of protective gloves are offered by various manufacturers. Please note the manufacturers' detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Tightly fitting safety glasses.

Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure

Protective clothing

When handled and stored appropriately no dangerous reactions are known.

When handled and stored appropriately no dangerous decomposition products are known.