Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Rigicon
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Electronic industry. Polishing agent for surfaces.
Manufacturers & Suppliers
INSULCON B.V.
P.O. Box 134 4650 AC STEENBERGEN, The Netherlands Zilverhoek 4, 4651 SP STEENBERGEN
+31 (0)167-565750
http://www.insulcon.com
KERAMAB N.V.
Belgium
+32 (0)3 711.02.78
INSULCON GMBH
Germany
+49 (0) 2162 249 60-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Colloidal suspension of amorphous silica, stabilized in an acid medium. Free from crystalline silica.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Synthetic Amorphous Silicon Dioxide | --- | 30% | No |
Synthetic Amorphous Silicon Dioxide (CAS 7631-86-9 / CAS 112926-00-8) Registration number : 01-2119379499-16-xxxx Insulcon B.V.- The Netherlands - Tel: +31 (0)167 565 750 Insulcon GmbH - Germany - Tel: +49 (0)2131 408548-0 Keramab N.V. - Belgium - Tel: +32 (0)3 711 02 78 INSULCON KERAMAB LILLEER IN NEW TRAFFIKATURC SOLUTIONS LILLEER IN HIGH TRAFFIKATURC SOLUTIONS www.insulcon.com / www.keramab.com Form: A1-076 Effective: 11072016/ES/ka Supersedes: 09102013/JN/an All Rights Reserved The information, recommendations and opinions set forth herein are offered solely for your consideration, inquiry and verification, and are not in part or detail to be construed as constituting a warranty or representation for which we assume legal responsibility. Nothing contained herein is to be interpreted as a authorisation to practice a patented invention without a license. All rights reserved.
Notes
SiO2 content : approx. 30 % Remarks : No dangerous ingredients according to Regulation (EC) No. 1907/2006 Remarks Non-hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air.
In case of contact with skin wash off immediately with plenty of water. Consult a doctor if skin irritation persists.
Rinse the affected eye immediately with plenty of water at the same time. Keep the unaffected eye well protected.
In case of problems seek medical advice and show the package or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, Dry powder, Foam, Carbon dioxide (CO₂). Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Firefighter Protection
Well closed full protective clothing (coat and pants) including helmet. Use self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not let product enter drains. Do not allow contact with soil, surface or ground water.
Pick up with liquid binding materials and if necessary fill in containers capable of being locked. Clean contaminated floors and objects thoroughly, observing environmental regulations
Materials: liquid binding materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide sufficient air exchange and/or exhaust in work rooms. During spraying, wear suitable respiratory equipment.
Keep containers tightly closed in a dry, cool and well ventilated place. Protect against frost.
Observe the general rules of industrial fire protection
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Nitrile rubber. Break through time: > 10 min. Glove thickness: > 0,4 mm. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit. Half mask with a particle filter P2 (EN 143)
protective clothing
Do not let product enter drains. Do not allow contact with soil, surface or ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Protect from frost.
no data available
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Rigicon?
The signal word is no signal word.
What is the physical form of Rigicon?
Rigicon is a liquid appearing as milky white with milky white color. It has odourless odor.
What is Rigicon used for?
Electronic industry. Polishing agent for surfaces.