EPOXY HARDENER

Remove the person affected from the area of exposure, provide clean air and keep at rest. Request medical attention if symptoms persist.

Clean the affected area thoroughly with water and neutral soap.

Symptoms: May cause an allergic skin reaction. Stinging, redness, rashes, blisters.

Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

Request immediate medical assistance, showing the SDS of this product. Do not induce vomiting. Rinse out the mouth and throat. In the case of loss of consciousness do not administer anything orally unless supervised by a doctor. Keep the person affected at rest.

Product is non-flammable under normal conditions of storage, handling and use. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems.

Non-applicable

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition.

Isolate leaks provided that there is no additional risk for the people performing this task.

This product is not classified as hazardous to the environment.

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and destroy using safe methods (section 6).

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Product is non-flammable under normal conditions of storage, handling and use.

NON-disposable chemical protective gloves (Material: Nitrile, Breakthrough time: > 480 min, Thickness: 0.4 mm), CE CAT III, EN ISO 374-1:2016+A1:2018 EN 16523-1:2015+A1:2018 EN ISO 21420:2020. The Breakthrough Time indicated by the manufacturer must exceed the period during which the product is being used. Do not use protective creams after the product has come into contact with skin.

Panoramic glasses against splash/projections., CE CAT II, EN 166:2002 EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing.

Filter mask for gases and vapours (Filter type: A), CE CAT III, EN 405:2002+A1:2010. Replace when there is a taste or smell of the contaminant inside the face mask. If the contaminant comes with warnings it is recommended to use isolation equipment.

Disposable clothing for protection against chemical risks, with antistatic and fireproof properties, CE CAT III, EN 1149-1,2,3 EN 13034:2005+A1:2009 EN ISO 13982-1:2004/A1:2010 EN ISO 6529:2013 EN ISO 6530:2005 EN ISO 13688:2013 EN 464:1994. For professional use only. Clean periodically according to the manufacturer's instructions. Safety footwear for protection against chemical risk, with antistatic and heat resistant properties, CE CAT III, EN ISO 13287:2020 EN ISO 20345:2011 EN 13832-1:2019. Replace boots at any sign of deterioration.

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see sub section 7.1.D

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction, Contact with air, Increase in temperature, Sunlight, Humidity: Not applicable

Acids: Avoid strong acids; Oxidising materials: Precaution

Contains substances which require external energy for spontaneous decomposition. Form explosive peroxides when distilled, evaporated or otherwise concentrated.

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).