HF-95X, HF-95Y, HF-95Z

Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily contaminated clothing and wash underlying skin.

Symptoms: For high pressure injections: tissue becomes swollen, discolored and extremely painful with extensive subcutaneous necrosis.

Wash eye thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or redness develops or persists.

Symptoms: pain or redness

If contamination of the mouth occurs, wash out thoroughly with water. Do not induce vomiting; obtain medical advice.

Use foam, dry powder or water fog.

DO NOT USE water jets.

Toxic fumes may be evolved on burning or exposure to heat.

Water may be used to cool nearby heat exposed areas/objects/packages. Avoid spraying directly into storage containers because of the danger of boil-over.

In the case of large spills contact the appropriate authorities.

Protect environmentally sensitive areas and water supplies.

Recover product from the surface.

Avoid contact with eyes. If splashing is likely to occur wear a full face visor or chemical goggles as appropriate. Avoid frequent or prolonged skin contact with fresh or used product.

Store under cover and protect from heat and sources of ignition. Keep containers closed when not in use.

Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times. Wash hands thoroughly after contact. Use disposable cloths and discard when soiled. Do not put soiled cloths into pockets.

Product contaminated rags, paper or material used to absorb spillage, represent a fire hazard, and should not be allowed to accumulate. Dispose of safely immediately after use.

Ensure good ventilation. If vapor, mists or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level.

If skin contact is likely, wear impervious protective clothing and/or gloves.

Wear face visor or goggles in circumstances where eye contact can accidentally occur.

Respiratory protection is unnecessary, provided the concentration or vapor, mists or fumes is adequately controlled. The use of respiratory equipment must be strictly in accordance with the manufactures' instructions and any statutory requirements governing its selection and use.

If skin contact is likely, wear impervious protective clothing and/or gloves.

stable under normal conditions of use

Products of this type are stable and unlikely to react in a hazardous manner under normal conditions of use.

Hazardous polymerization reactions will not occur.

strong oxidizing agents

Thermal decomposition products will vary with conditions. Incomplete combustion will generate smoke, carbon dioxide and hazardous gases, including carbon monoxide.

Where possible, arrange for product to be recycled. Dispose of via an authorized person/licensed waste disposal contractor in accordance with local regulations.