NextSDS Logo
Safety Data Sheet EN

Metpump IPSX AL-MG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Metpump IPSX AL-MG
Chemical Name
Alumina – Silicate Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial Furnace Lining Material

Manufacturers & Suppliers

M

Magneco/Metrel, Inc.

manufacturer

223 W. Interstate Road, Addison, IL 60101 USA

Emergency Contacts

Emergency Contact

+1 (630) 543-6660

Emergency Contact

+44 1388 776286

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Mullite EC: 215-113-2 1302-93-8 50 - 60% No
Aluminum Oxide EC: 215-691-6 1344-28-1 20 - 30% No
Silicon Dioxide EC: 231-545-4 7631-86-9 10 - 20% No
Proprietary Component A1 --- 2 - 8% No
Fumes, Silica EC: 273-761-1 69012-64-2 2 - 4% No
Cristobalite EC: 238-455-4 14464-46-1 0.1% No

Notes

The cristobalite and silicon dioxide are chemically combined within the base aggregate. The cristobalite is not present as free crystalline silica.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If necessary, use artificial respiration to support vital functions.

Symptoms: respiratory irritant

Skin contact

Wash thoroughly with soap and water. Remove exposed or contaminated clothing, taking care not to contaminate eyes. Seek immediate medical attention if adverse effect occurs.

Symptoms: skin irritant

Eye contact

Immediately flush eyes with copious amounts of water continuously for a minimum of 15 minutes. Seek immediate medical attention if adverse effect occurs.

Symptoms: Eye irritant

Ingestion

DO NOT attempt to induce vomiting. Have the individual rinse mouth with water thoroughly. NEVER give anything to an unconscious person. Call a physician or your local Poison Control Center and immediately have the person transported to a medical facility.

Immediate Medical Attention

Seek immediate medical attention if adverse effect occurs. Call a physician or your local Poison Control Center and immediately have the person transported to a medical facility.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Product will not support combustion. Use extinguishing media appropriate for surrounding fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow product to enter storm water, sewer drains, or surface water.

Cleanup methods

use wet sweeping techniques or vacuum clean.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid creating dust, use with adequate ventilation. Avoid contact with skin or eyes; wash thoroughly after handling. Use personal protective equipment as recommended in Section 8.

Storage

Store in a dry place.

Hygiene

wash thoroughly after handling

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilation must be adequate to maintain the ambient workplace atmosphere below the exposure limit(s) outlined in the MSDS. When engineering controls are not feasible, or while they are being implemented, appropriate respiratory protection must be used.

Hands

Use abrasive resistant gloves.

Eyes

Splash goggles or safety glasses with side shields should be worn.

Respiratory

If respiratory protection is needed, use a dust mask/respirator certified to NIOSH, ANSI (Z88.2), OSHA (29 CFR 1910.134), MSHA (30 CFR Parts 56 and 57), EN 149, AS 1715, Canadian CSA Standard Z94.4-93, European (E.U.), or individual country standards.

Skin/Body

Feet: Use approved safety footwear. Body: Use suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Auto Ignition Temperature
ND
Flammability
Non-flammable
Metal Corrosion
---
Appearance
Dark grey granular mixture
Properties Status
---
Softening Point
---
Explosive Limits
---
Bulk Density
---
Physical State Data
solid
Vapor Pressure
ND
Relative Evaporation Rate
---
Solubility In Fat
---
Odor
---
Solidification Point
---
Melting Point
>3000°F, >1650°C
Form
granular mixture
Partition Coefficient
ND
Evaporation Rate
ND
Relative Density
ND
Lower Explosive Limit
ND
Boiling Point
>3000°F, >1650°C
Vapor Density
ND
Freezing Point
ND
Kinematic Viscosity
---
Odor Threshold
---
Density
ND
Ph
ND
Flash Point
---
Molecular Weight
---
Colour
Dark grey
Physical State
Solid
Voc Content
---
Decomposition Temperature
ND
Dynamic Viscosity
---
Colour Intensity
---
State Under Standard Conditions
---
Solubility
---
Crystallisation Point
---
Solubility In Water
Negligible
Upper Explosive Limit
ND
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Avoid

Avoid creating dusts.

Decomposition

Cristobalite, after being exposed to high temperatures above 900°C, may increase the quantity of crystalline silica.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

managed in an appropriate manner utilizing an approved waste disposal facility

Disposal

Whatever cannot be saved for recovery or recycling should be managed in an appropriate manner utilizing an approved waste disposal facility. Processing, use or contamination of this product may change the waste management options.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Metpump IPSX AL-MG?

The signal word is no signal word.

What is the physical form of Metpump IPSX AL-MG?

Metpump IPSX AL-MG is a solid appearing as dark grey granular mixture with dark grey color.

What is Metpump IPSX AL-MG used for?

Industrial Furnace Lining Material

What is the melting point of Metpump IPSX AL-MG?

The melting point is >3000°F, >1650°C and the boiling point is >3000°F, >1650°C.