Metpump IPSX AL

Remove person to fresh air. If necessary, use artificial respiration to support vital functions.

Wash thoroughly with soap and water. Remove exposed or contaminated clothing, taking care not to contaminate eyes. Seek immediate medical attention if adverse effect occurs.

Symptoms: skin irritant

Immediately flush eyes with copious amounts of water continuously for a minimum of 15 minutes. Seek immediate medical attention if adverse effect occurs.

Symptoms: Eye irritant

DO NOT attempt to induce vomiting. Have the individual rinse mouth with water thoroughly. NEVER give anything to an unconscious person. Call a physician or your local Poison Control Center and immediately have the person transported to a medical facility.

Product will not support combustion. Use extinguishing media appropriate for surrounding fire.

Avoid creating dust. Use personal protective equipment as recommended in Section 8.

Do not allow product to enter storm water, sewer drains, or surface water.

Use wet sweeping techniques or vacuum clean.

Avoid creating dust, use with adequate ventilation. Avoid contact with skin or eyes; wash thoroughly after handling. Use personal protective equipment as recommended in Section 8. Comply with all applicable EPA, OSHA, NFPA, State, Local, and Country requirements.

Store in a dry place.

wash thoroughly after handling

Ventilation must be adequate to maintain the ambient workplace atmosphere below the exposure limit(s) outlined in the SDS. When engineering controls are not feasible, or while they are being implemented, appropriate respiratory protection must be used.

Use abrasive resistant gloves.

Splash goggles or safety glasses with side shields should be worn.

If respiratory protection is needed, use a dust mask/respirator certified to NIOSH, ANSI (Z88.2), OSHA (29 CFR 1910.134), MSHA (30 CFR Parts 56 and 57), EN 149, AS 1715, Canadian CSA Standard Z94.4-93, European (E.U.), or individual country standards.

Feet: Use approved safety footwear. Body: Use suitable protective clothing.

Stable

Stable

Avoid creating dusts.

Cristobalite, after being exposed to high temperatures above 900°C, may increase the quantity of crystalline silica.

managed in an appropriate manner utilizing an approved waste disposal facility

Whatever cannot be saved for recovery or recycling should be managed in an appropriate manner utilizing an approved waste disposal facility. Processing, use or contamination of this product may change the waste management options.