Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape
- Product Code
- Hiltex/Silica/001
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Hiltex Technische Weefsels B.V.
manufacturer
Handelsweg 37, 1525 RG West Knollendam, The Netherlands
31-(0)75-6871090
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica fibre | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take care of good ventilation.
Wash copiously with soap and lukewarm water.
Flush well with running water for 10 minutes.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water or powder.
Only the packaging burns (cardboard, polyethylene, PVC and polysterine).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Respect local disposal regulations (dump corresponding to product classified as “non hazardous”)
Sweep and shovel in containers designed for silica or glass fibers waste.
Related Products
Similar products with comparable safety profiles
S600VD/S1220VD/S600T/S1220T/S1020T/S1220 preshrunk/needlefelt S600PU/S1400VD/S1400 preshrunk
---
UV6000 - UV Satin Overprint Varnish
---
SW-TEMP (sheets & rolls)
---
System 3 Textile Printing Medium
---
Products group 200 from Von Roll Switzerland Ltd., like Thermopreg, Epoflex, Polyesterfleece, Polyesterfelt, Semi-conductive Corona Protection Tape, Glasoflex, Vetrotex, Vetroflex, Trial Samples with similar composition. All products from the group 200.
---
UV6107 - UV Gravure Matt Varnish
---
102/104/105/106/110/115/201/202/203/211/210/301/401/502/601/610/631 Cartridges
---
UV6024 - UV Gravure Matt Scratchresistant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in dry area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid generating dust by breaking the fibers. Use exhaust fan to minimise irritation effect.
Recommended to wear gloves
Wear protective glasses
Wear paper mask
Wear long sleeves to avoid irritation
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in storage conditions mentioned in chapter 7. Stable product, doesn’t lead to any dangerous reaction.
When the combustion is kept going, small quantities of CO, CO2 may result from the decomposition of the size.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Respect local disposal regulations concerning inert type wastes (dump corresponding to product classified as “non hazardous”).
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The REACH Regulation (Directive No. 1907/2006) does not apply to silica fiber products, or to finishing and coatings, as they are not considered hazardous substances under the regulation.
Filament fibre products with a diameter of at least 5 micron and the conventional coatings, which have no reactivity up to 55 °C are not listed under the REACH Regulation substances.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape?
The signal word is no signal word.
What is the physical form of S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape?
S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape is a solid with white for loomstate / gold for vermiculite light green for t1000 color.