Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape
- Product Code
- MSDS Silica 001
- Chemical Name
- Silica yarn, fabrics and tapes
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Hiltex Technische Weefsels BV.
manufacturer
Handelsweg 37, 1525 RG West-Knollendam, The Netherlands
+31 (0)75-687 1090
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Silica filament fiber 6 micron Pure fused continuous silica fibers with organic sizing for textile or composite material SiO₂ > 94%, sizing < 2%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica filament fiber | --- | 94% | No |
Notes
Hiltex Silica 001: silica fabrics and tapes
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air.
Wash immediately with soap and lukewarm water.
Flush well with running water for 10 minutes.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water or powder.
Only the packaging burns (cardboard, polyethylene, PVC and polystyrene).
Firefighter Protection
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the product, in case of contact refer to chapter 4.
Respect local disposal regulations concerning inert type wastes. Dump corresponding to product classified as "non hazardous".
Sweep and shovel in containers for silica or glass fiber waste.
Materials: containers
Related Products
Similar products with comparable safety profiles
S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape
---
S600VD/S1220VD/S600T/S1220T/S1020T/S1220 preshrunk/needlefelt S600PU/S1400VD/S1400 preshrunk
---
UV6000 - UV Satin Overprint Varnish
---
Alphaliner 300 / 500 / 500G / 1500 / 1800 / 1800H
---
SW-TEMP (sheets & rolls)
---
System 3 Textile Printing Medium
---
TEROSON SB S3000 BK BO 1L SFDN
---
TECHNOMELT PUR 9622 UV LS
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear a paper mask, gloves, protective glasses.
Preferably at 0 < 25°C and RH < 80%
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid generating dust by breaking the fibers. Use exhaust fan to minimise irritation effect.
Recommended to wear gloves
Wear protective glasses
Wear paper mask
Wear long sleeves to avoid irritation
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in storage conditions mentioned in Chapter 7.
This material is considered to be non reactive under normal use conditions.
Hazardous polymerization will not occur.
No data available.
No data available.
small quantities if CO, CO₂, may result from the decomposition of the sizing.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape?
The signal word is no signal word.
What is the physical form of S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape?
S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape is a solid with white or golden-brown color.
What is the solubility of S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape?
Partial solubility of sizing in water.
What is the melting point of S300 LS/S600 LS/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/silica tape?
The melting point is 1600°C .