Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
SILQUEST* A-2387 commonly used for industrial use only..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapor.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233: Keep container tightly closed.
- P264: Wash thoroughly after handling.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P332+P313: If skin irritation occurs: Get medical advice/attention.
- P337+P313: If eye irritation persists: Get medical advice/attention.
- P370+P378: In case of fire: Use alcohol resistant foam for extinction.
- P501: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Momentive Performance Materials GmbH
manufacturer
Chempark Leverkusen Gebaeude V7 DE - 51368 Leverkusen Germany
DE
00800.4321.1000 (Customer Service Centre)
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Europe, Israel & All other
+44 (0) 1235239670
GB
Middle East
+44 (0) 1235239671
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol EC: 200-578-6 | 64-17-5 | 50-100% | ⚠️ Hazardous |
| Silylated Polyazamide EC: Trade secret | Trade secret | 50-100% | ⚠️ Hazardous |
Composition Notes
All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. PBT: persistent, bioaccumulative and toxic substance. vPvB: very persistent and very bioaccumulative substance.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Call a physician or poison control center immediately.
🖐️ Skin Contact
Wash off promptly and flush contaminated skin with water. Promptly remove clothing if soaked through and flush skin with water. Wash contaminated clothing before reuse. Get medical attention.
👁️ Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
🍽️ Ingestion/Swallowing
If conscious, drink plenty of water. Do not induce vomiting. Call a physician or poison control center immediately.
🚨 Immediate Medical Attention Required
Call a physician or poison control center immediately (for inhalation and ingestion). Get medical attention (for eye and skin contact).
Medical Treatment
Treatment is symptomatic and supportive.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide eyewash station and safety shower. General (mechanical) room ventilation is expected to be satisfactory if handled at low temperatures or in covered equipment. Provide adequate ventilation if fumes or vapors are generated.
🧤 Hand Protection
Advice: This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Material: 890 Vitoject Minimum break through time: 480 min Glove thickness: 0,7 mm Guideline: EN 374
👁️ Eye Protection
Safety glasses with side-shields conforming to EN166
😷 Respiratory Protection
Respirator with a vapour filter (EN 141)
🦺 Skin/Body Protection
Safety shoes Wear suitable protective clothing.
🌍 Environmental Exposure Controls
No release to wastewater from process as such, wastewater emissions limited to release generated from final equipment cleaning step using water
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 1170
📦 Proper Shipping Name
ETHANOL SOLUTION
⚠️ Transport Hazard Class
3
📋 Packing Group
II
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for SILQUEST* A-2387?
The signal word for this substance is "danger".
What is the physical form of SILQUEST* A-2387?
SILQUEST* A-2387 is a liquid with amber color. It has alcohol odor.
What is the solubility of SILQUEST* A-2387?
No data available.
What is SILQUEST* A-2387 used for?
For industrial use only.
What are the hazard statements for SILQUEST* A-2387?
This substance has 3 hazard statements: H225: Highly flammable liquid and vapor. H315: Causes skin irritation. H319: Causes serious eye irritation.