Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium Hydrogensulphide 27-50%
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Pulp (paper) Chemical intermediate Tanning agents Impregnation and treatment spray for leather Reducing agent/ Deoxidiser
Manufacturers & Suppliers
QUADRIMEX CHEMICAL
manufacturer
772, Chemin du Mitan 84300 Cavaillon - FRANCE
04 90 78 70 50
Emergency Contacts
London / National Poisons Information Service
(44) 71.635.91.91
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulfhydrate de sodium EC: 240-778-0 | 16721-80-5 | 27 - 50% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately. Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Consult a doctor after eye contact. Call for medical help immediately after swallowing.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Sodium hydrosulfide 70 %, pure, flakes
CAS: 207683-19-0
Sodium hydrogen sulfide
CAS: 16721-80-5
Sodium hydroxide 32%
CAS: 1310-73-2
Sodium Hydroxide Solution 29% to 51%
CAS: 1310-73-2
SULPHURIC ACID 15 - 50%
CAS: 7664-93-9
SODIUM HYDROXIDE, 50%
---
Ammonium sulphide solution 42-44%
UFI: TN6X-J1W5-P00C-7M6H
Sodium sulfide nonahydrate
CAS: 1313-84-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Use protective suit.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S. (SODIUM HYDROSULPHIDE, HYDRATED)
- Transport Class
- 8 Corrosive substances.
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium Hydrogensulphide 27-50%?
The signal word is danger.
What is the physical form of Sodium Hydrogensulphide 27-50%?
Sodium Hydrogensulphide 27-50% is a fluid with yellow color. It has like rotten eggs (mercaptans) odor.
What is Sodium Hydrogensulphide 27-50% used for?
Pulp (paper) Chemical intermediate Tanning agents Impregnation and treatment spray for leather Reducing agent/ Deoxidiser
What are the hazard statements for Sodium Hydrogensulphide 27-50%?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H301: Toxic if swallowed.
- H314: Causes severe skin burns and eye damage.
- H400: Very toxic to aquatic life.