Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Milled dol 0/40µ-bulk
- Chemical Name
- Calcium magnesium carbonate
- Synonyms
- Dolomite, Dolomitic limestone, Magnesian limestone, Dolostone.
Regulatory Identifiers
- CAS Number
- 16389-88-1 Check regulations →
- EC Number
- 240-440-2 Check regulations →
- REACH No.
- This substance is exempt from registration according to Regulation (EC) No. 1907/2006 (REACH).
- UFI Code
- U73P-Y28K-K00S-AY0J
Identified Uses
Building and construction work, Manufacture of chemical products, Manufacture of basic metals, including alloys, Manufacture of other non-metallic mineral products, e.g. plasters, cement, Stone, plaster, cement, glass and ceramic articles, Agriculture, forestry, fishery, Water treatment chemicals, Other activities related to manufacture and services, Food/ feedstuff additives, Manufacture of food products, Pharmaceuticals, Mining (including offshore industries), Paper articles, Manufacture of paints, varnishes and similar coatings, printing ink and mastics
Uses advised against
There are no uses advised against.
Manufacturers & Suppliers
Rheinkalk GmbH
manufacturer
Am Kalkstein 1, 42489 Wülfrath, Germany
+492058170
Emergency Contacts
Emergency telephone number (Europe)
112
24 hours per day, 7 days per week.
Poison Information Centre
0032 70 245 245
Emergency telephone number (Company)
+49 2058 17 0
24 hours per day, 7 days per week.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium magnesium carbonate EC: 240-440-2 | 16389-88-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Carefully and gently brush the contaminated body surfaces in order to remove all traces of product. Wash affected area immediately with plenty of water. Remove contaminated clothing. If symptoms persist, call a physician.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Rinse thoroughly with plenty of water, also under the eyelids.
Immediately give large quantities of water to drink. If symptoms persist, call a physician. Do NOT induce vomiting.
Immediate Medical Attention
Follow the advice given in section 4.1.
Medical Treatment
Follow the advice given in section 4.1.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handling systems should preferably be enclosed or suitable ventilation installed to maintain atmospheric dust below the OES, if not wear suitable protective equipment.
Use approved nitrile impregnated gloves having CE marks.
Chemical resistant goggles must be worn. Do not wear contact lenses. For powders, tight fitting goggles with side shields, or wide vision full goggles. It is also advisable to have individual pocket eyewash.
Use appropriate respiratory protection against particles according to the risk level.
Use clothing fully covering skin, full length pants, long sleeved overalls, with close fittings at openings. Footwear resistant to caustics and avoiding dust penetration.
All ventilation systems should be filtered before discharge to atmosphere.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Milled dol 0/40µ-bulk known by?
Milled dol 0/40µ-bulk is also known as: Dolomite, Dolomitic limestone, Magnesian limestone, Dolostone.
What is the hazard signal word for Milled dol 0/40µ-bulk?
The signal word is no signal word.
What is the physical form of Milled dol 0/40µ-bulk?
Milled dol 0/40µ-bulk is a pebble, granular, powder appearing as solid material of varying sizes: lump, granular or powder. with white, off-white, beige color. It has slight earthy odor. odor.
What is the solubility of Milled dol 0/40µ-bulk?
28 - 120 mg/l; 20
What is Milled dol 0/40µ-bulk used for?
Building and construction work, Manufacture of chemical products, Manufacture of basic metals, including alloys, Manufacture of other non-metallic mineral products, e.g. plasters, cement, Stone, plaster, cement, glass and ceramic articles, Agriculture, forestry, fishery, Water treatment chemicals, Other activities related to manufacture and services, Food/ feedstuff additives, Manufacture of food products, Pharmaceuticals, Mining (including offshore industries), Paper articles, Manufacture of paints, varnishes and similar coatings, printing ink and mastics
What is the melting point of Milled dol 0/40µ-bulk?
The melting point is T> 600C: CaCO3.MgCO3 -> CaO.MgO + 2CO2 Decomposes without melting. and the boiling point is Not applicable (solid with a melting point > 450).