NextSDS Logo
Safety Data Sheet EN

Nickel standard solution 1000 µg/ml (Plasma HIQU)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Nickel standard solution 1000 µg/ml (Plasma HIQU)
Product Code
CL01.1421

Regulatory Identifiers

CAS Number
N/A
REACH No.
is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

C

CHEM-LAB NV

manufacturer

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

CHEM-LAB NV

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.

Precautionary Statements

P280 Wear protective gloves, protective clothing, eye protection, face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Nitric acid 67 - 69% (Pico-Pure) 7697-37-2 2 - 5% Yes
Nickel, powder v.p. 7440-02-0 0.1 - 0.2% Yes
Water (Ultra Pure) 7732-18-5 90% No

For the full text of H-Phrases mentioned in this Section, see Section 16.

Notes

For the full text of H-Phrases mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Fresh air.

Skin contact

Wash off with plenty of water. Remove contaminated clothing.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. Immediately call an ophthalmologist.

Ingestion

Never give anything by mouth to an unconscious person. Immediately make victim drink water (two glasses at most). Call in physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

In adaption to materials stored in the immediate neighbourhood.

Unsuitable media

Prevent fire-fighting water from entering surface water or groundwater.

Specific hazards

Non-combustible. Ambient fire may liberate hazardous vapours.

Instructions

Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.

Firefighter Protection

Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures necessary. The product should be handled with the care usual when dealing with chemicals. For precautions see section 2.2

Storage

Closed in a cool ventilated place. Recommended storage temperature see product label.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Work under hood .

Hands

Required.

Eyes

Required.

Respiratory

Required when vapours/aerosols are generated. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. Body protection: Required.

Environmental

Do not allow to enter sewerage system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
---
Bulk Density
---
Solubility In Fat
---
Form
Liquid
Solidification Point
---
Vapor Pressure
---
Freezing Point
---
Upper Explosive Limit
---
Evaporation Rate
---
Molecular Weight
---
Colour Intensity
---
Boiling Point
101°C
Cloud Point
---
Crystallisation Point
---
Voc Content
---
Solubility
---
Flammability
---
Auto Ignition Temperature
---
Melting Point
-3°C
Flash Point
---
Appearance
Liquid
Properties Status
---
Physical State Data
liquid
Colour
green
State Under Standard Conditions
---
Lower Explosive Limit
---
Partition Coefficient
---
Solubility In Water
soluble
Ph
pH < 1
Odor
Odourless
Density
1,02 g/ml
Metal Corrosion
---
Explosive Limits
---
Dynamic Viscosity
---
Softening Point
---
Relative Evaporation Rate
---
Decomposition Temperature
---
Physical State
Liquid
Relative Density
---
Vapor Density
---
Kinematic Viscosity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No further relevant information available.

Reactivity

See section 10.3

Hazardous reactions

Dangerous reactions are not expected handling the product according to its intended use.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No further relevant information available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Chemicals must be disposed of in compliance with the respective national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid solution)
Transport Class
8
Packing Group
III
ADR

no

IMDG

no

IATA

no

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Nickel standard solution 1000 µg/ml (Plasma HIQU)?

The signal word is warning.

What is the physical form of Nickel standard solution 1000 µg/ml (Plasma HIQU)?

Nickel standard solution 1000 µg/ml (Plasma HIQU) is a liquid appearing as liquid with green color. It has odourless odor.

What is Nickel standard solution 1000 µg/ml (Plasma HIQU) used for?

Reagent for analysis

What are the hazard statements for Nickel standard solution 1000 µg/ml (Plasma HIQU)?

This substance has 1 hazard statement:

  • H315: Causes skin irritation.

What is the melting point of Nickel standard solution 1000 µg/ml (Plasma HIQU)?

The melting point is -3°C and the boiling point is 101°C.