NextSDS Logo
Safety Data Sheet EN

Copper standard solution 1000 µg/ml (Plasma HIQU)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Copper standard solution 1000 µg/ml (Plasma HIQU)
Product Code
CL01.1131

Regulatory Identifiers

CAS Number
N/A
REACH No.
A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the number annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

C

CHEM-LAB NV

manufacturer

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

Emergency Contact

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.

Precautionary Statements

P280 Wear protective gloves, protective clothing, eye protection, face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
Copper 7440-50-8 0.1 - 0.2% Yes
Water 7732-18-5 90% No
Nitric acid 7697-37-2 2 - 5% Yes

Notes

For the full text of H-Phrases mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Fresh air.

Skin contact

Wash off with plenty of water. Remove contaminated clothing.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. lmmediately call an ophtalmologist.

Ingestion

Immediately make victim drink water (two glasses at most). Call in physician.

Immediate Medical Attention

No data available

Medical Treatment

No data available

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Protective clothing should be selected specificlly for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1

Hands

Required.

Eyes

Required.

Respiratory

Required when vapours/aerosols are generated. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Required.

Environmental

Do not allow to enter sewerage system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Vapor Density
---
Upper Explosive Limit
---
Relative Density
---
Softening Point
---
Properties Status
---
Solubility In Fat
---
Boiling Point
101C
Odor Threshold
---
Solubility
---
Kinematic Viscosity
---
Colour
blue
Evaporation Rate
---
Colour Intensity
---
Partition Coefficient
---
Ph
pH < 1
Flash Point
---
Physical State Data
liquid
Voc Content
---
Metal Corrosion
---
State Under Standard Conditions
---
Decomposition Temperature
---
Flammability
---
Dynamic Viscosity
---
Molecular Weight
---
Odor
Odourless
Explosive Limits
---
Density
1,02 g/ml
Freezing Point
---
Crystallisation Point
---
Solidification Point
---
Physical State
Liquid
Auto Ignition Temperature
---
Melting Point
-3C
Lower Explosive Limit
---
Form
Liquid
Appearance
---
Solubility In Water
soluble
Bulk Density
---
Cloud Point
---
Vapor Pressure
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid solution)
Transport Class
8
Packing Group
III
ADR

no

IMDG

no

IATA

no

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Copper standard solution 1000 µg/ml (Plasma HIQU)?

The signal word is warning.

What is the physical form of Copper standard solution 1000 µg/ml (Plasma HIQU)?

Copper standard solution 1000 µg/ml (Plasma HIQU) is a liquid with blue color. It has odourless odor.

What is Copper standard solution 1000 µg/ml (Plasma HIQU) used for?

Reagent for analysis

What are the hazard statements for Copper standard solution 1000 µg/ml (Plasma HIQU)?

This substance has 1 hazard statement:

  • H315: Causes skin irritation.

What is the melting point of Copper standard solution 1000 µg/ml (Plasma HIQU)?

The melting point is -3C and the boiling point is 101C.