Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Octane 80 Blend
- Product Code
- 205436
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of substance - Industrial, Formulation and (re)packaging of substances and mixtures - Industrial, Distribution of substance - Industrial, Use in Cleaning Agents - Industrial, Use in Cleaning Agents - Professional, Use as a Fuel - Industrial, Use as a Fuel - Professional, Use as a Fuel - Consumer, Use in Laboratories - Industrial, Use in Laboratories - Professional
Manufacturers & Suppliers
Haltermann Carless Deutschland GmbH
manufacturer
Schlengendeich 17, 21107 Hamburg, Germany
+49 (0)40 333 18 0
Emergency Contacts
CHEMTREC
+1-703-527-3887
CHEMTREC
+44 20 3885 0382
CHEMTREC
+44 20 3807 3798
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness bring patient into stable side position for transport.
Instantly wash with water and soap and rinse thoroughly. Instantly rinse with water.
Rinse opened eye for several minutes under running water.
instantly call for medical help.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Nitrile rubber, NBR - 0,38 mm Penetration time of glove material - 480 min (EN 374)
Tightly sealed safety glasses.
Ensure good ventilation. This can be achieved by using a local exhaustion or general exhaust system. If these measures are insufficient to keep the solvent vapour concentration below the workplace limit, wear an adequate respiratory protective device. Filter A.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3295
- Shipping Name
- HYDROCARBONS, LIQUID, N.O.S.
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Octane 80 Blend?
The signal word is danger.
What is the physical form of Octane 80 Blend?
Octane 80 Blend is a fluid with colourless color. It has characteristic odor.
What is Octane 80 Blend used for?
Manufacture of substance - Industrial, Formulation and (re)packaging of substances and mixtures - Industrial, Distribution of substance - Industrial, Use in Cleaning Agents - Industrial, Use in Cleaning Agents - Professional, Use as a Fuel - Industrial, Use as a Fuel - Professional, Use as a Fuel - Consumer, Use in Laboratories - Industrial, Use in Laboratories - Professional
What are the hazard statements for Octane 80 Blend?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Octane 80 Blend?
The melting point is Not determined and the boiling point is 98 C.