NextSDS Logo
Safety Data Sheet EN

n-Pentadecane

CAS 629-62-9
EC 211-098-1

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
n-Pentadecane
Product Code
129820000; 129820250; 129822500; 129820010
Chemical Name
n-Pentadecane

Regulatory Identifiers

CAS Number
629-62-9 Check regulations →
EC Number
211-098-1 Check regulations →

Identified Uses

Laboratory chemicals.

Uses advised against

No Information available

Manufacturers & Suppliers

F

Fisher Scientific UK

distributor

Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom

T

Thermo Fisher Scientific

distributor

Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium

Emergency Contacts

Emergency Contact

001-800-227-6701

Emergency Contact

+32 14 57 52 11

Emergency Contact

001-201-796-7100

Emergency Contact

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways

Precautionary Statements

P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P331 Do NOT induce vomiting

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Pentadecane EC: 211-098-1 629-62-9 95% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention. If not breathing, give artificial respiration.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention if symptoms occur.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Do NOT induce vomiting. Call a physician or poison control center immediately. If vomiting occurs naturally, have victim lean forward.

Immediate Medical Attention

Get medical attention (for eye contact, inhalation, and if skin symptoms occur). Call a physician or poison control center immediately (for ingestion). Treat symptomatically.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source

Hands

Protective gloves. Glove material: Natural rubber, Nitrile rubber, Neoprene, PVC. EU standard: EN 374 (minimum requirement). See manufacturers recommendations for breakthrough time and glove thickness. Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

Eyes

Wear safety glasses with side shields (or goggles) (European standard - EN 166)

Respiratory

Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Small scale/Laboratory use: Maintain adequate ventilation

Skin/Body

Wear appropriate protective gloves and clothing to prevent skin exposure.

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Solubility In Fat
---
Evaporation Rate
---
Softening Point
No data available
Form
---
Relative Density
0.773
State Under Standard Conditions
---
Metal Corrosion
---
Flammability
Flammability (liquid) No data available; Flammability (solid,gas) Not applicable Liquid
Physical State Data
liquid
Physical State
Liquid
Density
0.773
Solubility
No information available
Dynamic Viscosity
---
Flash Point
132 C / 269.6 F
Partition Coefficient
---
Auto Ignition Temperature
No data available
Ph
No information available
Upper Explosive Limit
6.5 Vol%
Solubility In Water
Insoluble
Molecular Weight
212.42
Explosive Limits
---
Freezing Point
---
Boiling Point
270 C / 518 F @ 760 mmHg
Colour Intensity
---
Relative Evaporation Rate
---
Vapor Pressure
1 mmHg @ 92 C
Solidification Point
---
Odor
No information available
Voc Content
---
Decomposition Temperature
No data available
Crystallisation Point
---
Lower Explosive Limit
0.45 Vol%
Vapor Density
7.4 (Air = 1.0)
Cloud Point
---
Colour
Colorless
Bulk Density
Not applicable Liquid
Odor Threshold
No data available
Kinematic Viscosity
---
Melting Point
9.9 C / 49.8 F
Appearance
Colorless
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for n-Pentadecane?

The signal word is danger.

What is the physical form of n-Pentadecane?

n-Pentadecane is a liquid appearing as colorless with colorless color. It has no information available odor.

What is the solubility of n-Pentadecane?

No information available

What is n-Pentadecane used for?

Laboratory chemicals.

What are the hazard statements for n-Pentadecane?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways

What is the melting point of n-Pentadecane?

The melting point is 9.9 C / 49.8 F and the boiling point is 270 C / 518 F @ 760 mmHg.

Compliance Scanner

Scan your compliance