Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Azelaic acid
- Product Code
- 401520000; 401520250; 401521000; 401525000
- Chemical Name
- Azelaic acid
- Synonyms
- Nonanedioic acid
Regulatory Identifiers
- CAS Number
- 123-99-9 Check regulations →
- EC Number
- 204-669-1 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Thermo Fisher Scientific
importer
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Fisher Scientific UK
importer
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Fisher Scientific AG
distributor
Neuhofstrasse 11, CH 4153 Reinach
+41 (0) 56 618 41 11
Emergency Contacts
Emergency Number US
001-201-796-7100
Emergency Number Europe
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Tox Info Suisse
145
24hr
Tox Info Suisse
+41-44 251 51 51
Chemtrec
0800 564 402
24h
Chemtrec
+41-43 508 20 11
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nonanedioic acid | 123-99-9 | 98% | No |
Full text of Hazard Statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention immediately if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Glove material types include Natural rubber, Butyl rubber, Nitrile rubber, Neoprene, PVC. Breakthrough time and glove thickness should be based on manufacturers' recommendations. EU standard: EN 374 (minimum requirement). Inspect gloves before use, observe instructions regarding permeability and breakthrough time provided by the supplier. Gloves should be suitable for the task considering chemical compatibility, dexterity, operational conditions, user susceptibility (e.g., sensitisation effects), and specific local conditions such as danger of cuts, abrasion. Handle gloves with care avoiding skin contamination.
Wear safety glasses with side shields (or goggles) (European standard - EN 166)
No protective equipment is needed under normal use conditions. For large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. For small scale/Laboratory use: Maintain adequate ventilation. Recommended half mask: Valve filtering: EN405; or; Half mask: EN140; plus filter, EN 141.
Wear appropriate protective gloves and clothing to prevent skin exposure.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Azelaic acid known by?
Azelaic acid is also known as: Nonanedioic acid
What is the hazard signal word for Azelaic acid?
The signal word is no signal word.
What is the physical form of Azelaic acid?
Azelaic acid is a powder solid appearing as off-white . It has odorless odor.
What is the solubility of Azelaic acid?
No information available
What is Azelaic acid used for?
Laboratory chemicals.
What is the melting point of Azelaic acid?
The melting point is 98 - 103 C / 208.4 - 217.4 F and the boiling point is 237 C / 458.6 F @ 20 hPa.