NextSDS Logo
Safety Data Sheet EN

Sulfuric Acid, 70-100%

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sulfuric Acid, 70-100%
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use.

Manufacturers & Suppliers

CHEMTRADE LOGISTICS INC. logo

CHEMTRADE LOGISTICS INC.

manufacturer

155 Gordon Baker Road, Suite 300, Toronto, Ontario M2H 3N5

(416) 496-5856

http://www.chemtradelogistics.com

Emergency Contacts

CHEMTREC

+1-800-424-9300

CHEMTREC

+1-703-741-5970

Chemtrade Emergency Contact

(866) 416-4404

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318
Carc. Cat. 1A H350
Aquatic Acute Cat. 3 H402

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H350 May cause cancer (Inhalation).
H402 Harmful to aquatic life.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original container.
P260 Do not breathe vapors, mist, or spray.
P264 Wash hands, forearms, and other exposed areas thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, and eye protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 If exposed or concerned: Get medical advice/attention.
P310 Immediately call a POISON CENTER or doctor.
P321 Specific treatment (see section 4 on this SDS).
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P406 Store in corrosive resistant container with a resistant inner liner.
P501 Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
Sulfuric acid 7664-93-9 70 - 100% Yes
Water 7732-18-5 30% No

Notes

Percentages are listed in weight by weight percentage (w/w%) for liquid and solid ingredients. Gas ingredients are listed in volume by volume percentage (v/v%). Strong inorganic acid aerosols/mists containing this substance are carcinogenic to humans via inhalation. Under normal conditions of use this route of exposure is not expected.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Symptoms: May be corrosive to the respiratory tract.

Skin contact

Remove contaminated clothing. Immediately flush skin with plenty of water for at least 30 minutes. Get immediate medical advice/attention. Wash contaminated clothing before reuse.

Symptoms: Causes severe irritation which will progress to chemical burns.

Eye contact

Rinse cautiously with water for at least 30 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.

Symptoms: Causes permanent damage to the cornea, iris, or conjunctiva.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Symptoms: May cause burns or irritation of the linings of the mouth, throat, and gastrointestinal tract.

Immediate Medical Attention

If exposed or concerned, get medical advice and attention. If medical advice is needed, have product container or label at hand.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are observed.

Hands

Wear protective gloves.

Eyes

Chemical safety goggles and face shield.

Respiratory

If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn. In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory protection. Insufficient ventilation: wear respiratory protection.

Skin/Body

Wear suitable protective clothing. Acid-resistant clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
---
Softening Point
---
Cloud Point
---
Decomposition Temperature
Not available
Relative Density
Not available
Melting Point
10.56 C (51.01 F)
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Appearance
Clear, Colorless to Amber, Oily
Physical State Data
liquid
Flash Point
Not applicable
Molecular Weight
---
Form
Oily
Ph
0.3
Vapor Pressure
0.00027 - 0.16 kPa at 25 C (77 F)
Partition Coefficient
Not available
Boiling Point
279 C (535 F)
Kinematic Viscosity
Not available
Bulk Density
---
Voc Content
---
Flammability
Not applicable
Colour Intensity
Clear
Properties Status
---
Dynamic Viscosity
Not available
Solubility In Water
Miscible
State Under Standard Conditions
---
Solidification Point
---
Solubility
Water: Miscible
Evaporation Rate
Not available
Density
1.84
Relative Evaporation Rate
---
Explosive Limits
---
Crystallisation Point
---
Auto Ignition Temperature
Not applicable
Physical State
Liquid
Colour
Colorless to Amber
Odor Threshold
Not available
Vapor Density
---
Odor
Pungent
Solubility In Fat
---
Freezing Point
-29 C (-21 F)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1830
Shipping Name
SULFURIC ACID
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sulfuric Acid, 70-100%?

The signal word is danger.

What is the physical form of Sulfuric Acid, 70-100%?

Sulfuric Acid, 70-100% is a liquid appearing as clear, colorless to amber, oily with colorless to amber color. It has pungent odor.

What is the solubility of Sulfuric Acid, 70-100%?

Water: Miscible

What is Sulfuric Acid, 70-100% used for?

Industrial use.

What are the hazard statements for Sulfuric Acid, 70-100%?

This substance has 5 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.
  • H318: Causes serious eye damage.
  • H350: May cause cancer (Inhalation).
  • H402: Harmful to aquatic life.

What is the melting point of Sulfuric Acid, 70-100%?

The melting point is 10.56 C (51.01 F) and the boiling point is 279 C (535 F).