Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WACKER® Vinylacetat Monomer stab.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial. Industrial monomer to be polymerized or reacted.
Uses advised against
All other areas of application to be agreed with the Application Engineering/ Technical Marketing Department of the manufacturer.
Manufacturers & Suppliers
Wacker Chemie AG
manufacturer
Hanns-Seidel-Platz 4, D 81737 München
+49 89 6279-0
Emergency Contacts
NRCC
+86-532-83 88 90 90
National Response Center
+49 621 60-43333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Vinyl acetate EC: 203-545-4 | 108-05-4 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash with plenty of water or water and soap. In the event of a visible skin change or other complaints, seek medical advice (show label or SDS where possible).
Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.
Give several small portions of water to drink. Do not induce vomiting.
Immediate Medical Attention
Further toxicology information in section 11 must be observed.
Medical Treatment
Further toxicology information in section 11 must be observed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, extinguishing powder, foam, carbon dioxide.
water jet.
At low oxygen level: carbon monoxide.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away. Avoid inhaling mists and vapours. Avoid contact with eyes and skin.
Absorb with a liquid binding material such as diatomaceous earth
Contain larger amounts and pump up into suitable containers.
Prevent material from entering sewers or surface waters.
Absorb with a liquid binding material, pump up into suitable containers.
Materials: diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Do not mix with alkalis, strong acids, oxidizing agents.
Keep container tightly closed. Store in a dry and cool place.
Cool endangered containers with water. Extinguish flames only when no further combustible mixtures can be formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Observe regulations for protection against explosion.
rubber gloves, protective gloves coated with neoprene . Gloves designed to protect against spray and splashes only. Wear gloves for short periods only < 10 mins.
protective goggles .
gas mask filter A . In case of long or strong exposure: positive pressure self contained breathing apparatus .
protective clothing .
Prevent material from entering surface waters and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
Ensure adequate stabilisation. Possibility of spontaneous polymerization of unstabilized product by ambient temperature.
alkalis, amines, oxidizing agents, strong acids.
If stored and handled properly: none known. By hydrolysis: Acetaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
Bioaccumulation is not expected to occur.
12.4 Mobility in soil
The partition coefficient soil/water (logKoc) indicates a very high mobility in soil.
12.5 Other adverse effects
none known
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1301
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
National and local regulations must be observed.
For information on labelling please refer to section 2 of this document.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WACKER® Vinylacetat Monomer stab.?
The signal word is danger.
What is the physical form of WACKER® Vinylacetat Monomer stab.?
WACKER® Vinylacetat Monomer stab. is a liquid with colourless color. It has pleasant odor.
What is the solubility of WACKER® Vinylacetat Monomer stab.?
totally miscible with common organic solvents
What is WACKER® Vinylacetat Monomer stab. used for?
Industrial. Industrial monomer to be polymerized or reacted.
What are the hazard statements for WACKER® Vinylacetat Monomer stab.?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of WACKER® Vinylacetat Monomer stab.?
The melting point is -100 - -93 C and the boiling point is 72 - 73 C at 1013 hPa (DIN 51751).