Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Barlox™ 12
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Emulsifier
Manufacturers & Suppliers
Lonza Ltd
manufacturer
Muenchensteinerstrasse 38 CH-4002 Basel, Switzerland
+41 61 316 81 11
Emergency Contacts
Lonza Ltd
+41 61 313 94 94
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amines, coco alkyldimethyl, N-oxides EC: 263-016-9 | 61788-90-7 | 30% | Yes |
| Water EC: 231-791-2 | 7732-18-5 | 70% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of soap and water. Consult a physician.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Call a physician immediately.
Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Consult a physician. Call a physician immediately.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Water spray, Foam
Heating or fire can release toxic gas.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use respirator when performing operations involving potential exposure to vapour of the product.
Do not flush into surface water or sanitary sewer system.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide sufficient air exchange and/or exhaust in work rooms. Avoid contact with skin and eyes.
Keep container tightly closed. To maintain product quality, do not store in heat or direct sunlight. Keep in a dry, cool and well-ventilated place.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles
In the case of vapour formation use a respirator with an approved filter. Respirator with a vapour filter (EN 141) Respirator with ABEK filter.
Choose body protection according to the amount and concentration of the dangerous substance at the work place. No special protective equipment required.
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended storage conditions.
Hazardous polymerisation does not occur.
no data available
Reducing agents
Nitrogen oxides (NOx), Carbon oxides, Heating or fire can release toxic gas.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The mixture contains no substances considered to be persistent, bioaccumulating and toxic (PBT) or very persistent and very bioaccumulating (vPvB).
12.6 Other adverse effects
Toxicity
Persistence and degradability
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Contact waste disposal services.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (C12/C14/C16-Alkyldimethylamine oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Barlox™ 12?
The signal word is danger.
What is the physical form of Barlox™ 12?
Barlox™ 12 is a liquid with light yellow color. It has fatty odour odor.
What is Barlox™ 12 used for?
Emulsifier
What are the hazard statements for Barlox™ 12?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H400: Very toxic to aquatic life.
What is the melting point of Barlox™ 12?
The melting point is no data available and the boiling point is > 100 °C.