Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Isocil™ NR 14
- Chemical Name
- Isocil™ NR 14
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocides
Manufacturers & Suppliers
Lonza Ltd
manufacturer
Muenchensteinerstrasse 38, CH-4002 Basel, Switzerland
+41 61 316 81 11
Emergency Contacts
Lonza Ltd
+41 61 313 94 94
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-Chloro-2-methyl-2H-isothiazol-3-one and 2-Methyl-2H-isothiazol-3-one (mixture 3:1) | 55965-84-9 | 10 - 20% | Yes |
| Magnesium nitrate EC: 233-826-7 | 10377-60-3 | 20 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Give oxygen.
Take off all contaminated clothing immediately. After contact with skin, wash immediately with plenty of soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles Face-shield
In the case of vapour formation use a respirator with an approved filter. Respirator with a vapour filter (EN 141) Respirator with ABEK filter.
Choose body protection according to the amount and concentration of the dangerous substance at the work place. Rubber or plastic apron Rubber or plastic boots
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquid, toxic, n.o.s.
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Isocil™ NR 14?
The signal word is danger.
What is the physical form of Isocil™ NR 14?
Isocil™ NR 14 is a liquid with light yellow color.
What is Isocil™ NR 14 used for?
Biocides
What are the hazard statements for Isocil™ NR 14?
This substance has 3 hazard statements:
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
What is the melting point of Isocil™ NR 14?
The melting point is -33 C and the boiling point is 100 C.