Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISOTON® II Diluent
- Product Code
- 8448011, 8448033
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For laboratory use only. See product literature for details.
Manufacturers & Suppliers
Beckman Coulter, Inc.
manufacturer
250 S. Kraemer Blvd, Brea, CA 92821, U.S.A.
800-854-3633
Beckman Coulter Eurocenter S.A.
importer
22, rue Juste-Oliver, Case Postale 1044, CH-1260 Nyon 1, Switzerland
+41 (0)22 365 36 11
Emergency Contacts
Chemtrec
800-424-9300
24H
Chemtrec
(001) 703-527-3887
24H
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Ingredients: None
First Aid Measures
Emergency procedures for chemical exposure incidents
If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately and obtain medical attention.
In case of skin contact, flush with copious amounts of water for at least 15 minutes. If pain or irritation occur, obtain medical attention.
If product enters eyes, wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open. If pain or irritation occur, obtain medical attention.
If ingested, wash mouth out with water. If irritation or discomfort occurs, seek medical attention.
Immediate Medical Attention
If individual is not breathing, begin artificial respiration immediately and obtain medical attention. If pain or irritation occur, obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.
No special hazards determined.
Firefighter Protection
Self-contained breathing apparatus is recommended for firefighters in all chemical fire situations.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use good laboratory procedures.
Contain spill to prevent migration.
Absorb spilled material with an appropriate inert, non-flammable absorbent and dispose according to local regulations.
Materials: appropriate inert, non-flammable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary; use good laboratory procedures.
To maintain product quality, store according to the instructions in the product labeling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special engineering controls are required. Use with good general ventilation.
Impervious gloves, such as Nitrile or equivalent, should be worn to prevent skin contact. Refer U.S. OSHA 29 CFR 1910.138, European Standard EN374 or appropriate government standards.
Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.
Under normal conditions, the use of this product should not require respiratory protection.
Impervious gloves, such as Nitrile or equivalent, should be worn to prevent skin contact. Refer U.S. OSHA 29 CFR 1910.138, European Standard EN374 or appropriate government standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with recommended storage conditions.
No further relevant information available.
No further relevant information available.
To maintain product performance keep away from strong acids, strong bases, strong oxidizers. Avoid exposure to heat and direct sunlight.
No further relevant information available.
No decomposition products posing significant hazards would be expected from this product (an aqueous solution).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical residues and remains should be routinely handled as special waste.
Chemical residues and remains should be routinely handled as special waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This SDS complies with EC Regulations 1907/2006 (REACH) and amendments. Product does not meet WHMIS criteria for hazardous materials.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISOTON® II Diluent?
The signal word is no signal word.
What is the physical form of ISOTON® II Diluent?
ISOTON® II Diluent is a liquid appearing as clear with colorless color. It has odorless odor.
What is the solubility of ISOTON® II Diluent?
Miscible
What is ISOTON® II Diluent used for?
For laboratory use only. See product literature for details.
What is the melting point of ISOTON® II Diluent?
The melting point is Not determined and the boiling point is Not determined.