Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Naphtha (petroleum), hydrodesulfurized light commonly used manufacture of substance distribution of substance formulation & (re)packing of substances and mixtures synthesis intermediate product uses in coatings use in cleaning agents use as a fuel rubber production and processing for the detailed uses of the product see annex of the safety data sheet recommended uses recommended to professional users.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H340: May cause genetic defects
- H350: May cause cancer
- H361d: Suspected of damaging the unborn child
- H373: May cause damage to organs through prolonged or repeated exposure
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P201: Obtain special instructions before use.
- P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- P243: Take precautionary measures against static discharge.
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
- P331: Do NOT induce vomiting.
- IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician.
- Store in a well-ventilated place. Keep cool.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
TOTAL PETROCHEMICALS & REFINING SA/NV
manufacturer
rue de l'Industrie 52 Nijverheidsstraat B- 1040 BRUSSELS BELGIUM
BE
+32 (0)2.288.91.11
+32 (0)2.288.33.69
TOTAL RAFFINADERIJ ANTWERPEN
manufacturer
BE
TOTAL RAFFINAGE FRANCE
manufacturer
FR
TOTAL RAFFINERIE MITTELDEUTSCHLAND
manufacturer
DE
TOTAL LINDSEY OIL REFINERY
manufacturer
GB
ZEELAND REFINERY
manufacturer
NL
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Carechem 24 International
+44 (0) 1235 239 670
GB
Languages: EN
for English speaking countries
Carechem 24 International
+ 33 1 49 00 00 49
FR
for Europe (in local languages)
Carechem 24 International
+ 44 (0) 1235 239 671
GB
for Africa and Middle East
Carechem 24 International
+ 86 10 5100 3039
CN
to/from China
Carechem 24 International
+ 86 532 8388 9090
CN
within China
Carechem 24 International
+ 65 3158 1074
SG
for Asia Pacific (Hong-Kong, Singapore, Taiwan, Philippines, India, Vietnam, Sri Lanka, Japan, Korea, Malaysia, Indonesia, Thailand)
National Poisons Emergency Number
0845 4647
GB
Official advisory body UK
National Poisons Information Centre
+ 00 353 (0)1 809 2566
IE
IRL
National Poisons Information Centre
+ 00 353 (0)1 837 9964
IE
IRL
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceGeneral Composition
NAPHTHA (PETROLEUM), HYDRODESULFURIZED LIGHT ( benzene < 1% - toluene < 10% - n-hexane < 3% - Flam Liq 2 )
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Toluene EC: 203-625-9 | 108-88-3 | 10% | ⚠️ Hazardous |
| n-Hexane EC: 203-777-6 | 110-54-3 | 3% | ⚠️ Hazardous |
| Benzene EC: 200-753-7 | 71-43-2 | 1% | ⚠️ Hazardous |
Additional Information
H Phrase(s) used some of the components of this mixture are classified and have hazard statements (H), but only their code are indicated in this rubric. you may find the full text of them in rubric 16. R Phrase(s) used some of the components of this preparation are classified following the European directives and have risk phrases (R), but only their code are indicated in this rubric. you may find the full text of them in rubric 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and keep at rest in a position comfortable for breathing. seek medical advice immediately. if necessary, give oxygen Check for possible heart rate problems if breathing has stopped: administer artificial respiration. Keep under medical surveillance
🖐️ Skin Contact
Take off immediately all contaminated clothing after contact with skin, wash immediately with plenty of water, for at least 15 minutes. in case of serious contamination, seek immediate hospital treatment
👁️ Eye Contact
Do not wear contact lenses in any work area. flush immediately with plenty of water, holding the eyelids open Get medical advice (ophthalmologist)
🍽️ Ingestion/Swallowing
give nothing to drink and do not induce vomiting (risk of pulmonary aspiration). If swallowed, rinse mouth with water (only if the person is conscious)
🚨 Immediate Medical Attention Required
IN CASE OF HEAVY OR PERSISTENT DISTURBANCES, CALL A DOCTOR OR SEEK MEDICAL ADVICE URGENTLY. Seek medical advice immediately for inhalation exposure. Keep under medical surveillance. In case of serious skin contamination, seek immediate hospital treatment. Get medical advice (ophthalmologist) for eye contact. Seek medical advice urgently for ingestion.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
The substance is flammable and therefore the following conditions must be met to ensure safe use: Risks are controlled by storage and use under conditions which avoid all ignition sources.
🧤 Hand Protection
gloves resistant to aromatic hydrocarbons In case of immersion: recommended material: fluorinated polymer or polyvinyl alcohol layer thickness : all thicknesses penetration time according to norm EN 374-3 > 480 minutes In case of contact with spray: recommended material: nitrile layer thickness > 0,3 mm penetration time according to norm EN 374-3 > 60 minutes Remarks: Gloves may degrade in contact with this chemical. - Carefully check the glove for cracks or damage before reusing it, dispose of gloves where the penetration time is exceeded. - The penetration time depends on temperature, glove material, thickness and construction. Penetration time is measured against EN 374 in laboratory conditions corresponding to permanent static contact and is not necessarily representative of the risk in the workplace. Contact the gloves' supplier for further information on the selection and resistance of gloves.
👁️ Eye Protection
goggles/spectacles Do not wear contact lenses in any work area.
😷 Respiratory Protection
local exhaust ventilation may be needed when working in a closed area wear suitable breathing equipment, in case of risk of exposure to vapour or fumes. if exposure is likely to exceed the occupational exposure limit, in a ventilated space, use an approved respiratory protective equipment; in confined space, use an autonomous breathing apparatus.
🦺 Skin/Body Protection
where exposure is likely, protective clothing must be worn including gloves
🌍 Environmental Exposure Controls
handle in accordance with good industrial hygiene and safety procedures
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1268
📦 Proper Shipping Name
PETROLEUM DISTILLATES, N.O.S. ( Naphtha (petroleum), hydrodesulfurized light )
⚠️ Transport Hazard Class
3
📋 Packing Group
II
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Naphtha (petroleum), hydrodesulfurized light?
The signal word for this substance is "danger".
What is the physical form of Naphtha (petroleum), hydrodesulfurized light?
Naphtha (petroleum), hydrodesulfurized light is a liquid with colourless to light yellow color. It has solvent odor.
What is the solubility of Naphtha (petroleum), hydrodesulfurized light?
Soluble in Aliphatic hydrocarbons and Aromatic hydrocarbons
What is Naphtha (petroleum), hydrodesulfurized light used for?
Manufacture of substance Distribution of substance Formulation & (re)packing of substances and mixtures Synthesis intermediate product Uses in Coatings Use in Cleaning Agents Use as a fuel Rubber production and processing For the detailed uses of the product see annex of the safety data sheet Recommended uses Recommended to professional users
What are the hazard statements for Naphtha (petroleum), hydrodesulfurized light?
This substance has 9 hazard statements: H225: Highly flammable liquid and vapour. H304: May be fatal if swallowed and enters airways. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. H340: May cause genetic defects H350: May cause cancer H361d: Suspected of damaging the unborn child H373: May cause damage to organs through prolonged or repeated exposure H411: Toxic to aquatic life with long lasting effects.