Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
NAPHTHA (PETROLEUM), CATALYTIC REFORMED commonly used manufacture of substance, distribution of substance, formulation & (re)packing of substances and mixtures, synthesis intermediate product, recommended to professional users.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H224: Extremely flammable liquid and vapour
- H304: May be fatal if swallowed and enters airways
- H315: Causes skin irritation
- H336: May cause drowsiness or dizziness
- H340: May cause genetic defects
- H350: May cause cancer
- H361: Suspected of damaging fertility or the unborn child
- H411: Toxic to aquatic life with long lasting effects
Precautionary Statements
- P201: Obtain special instructions before use
- P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking
- P243: Take precautionary measures against static discharge
- P260: Do not breathe dust/fume/gas/mist/vapours/spray
- P273: Avoid release to the environment
- P280: Wear protective gloves/protective clothing/eye protection/face protection
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor
- P331: Do NOT induce vomiting
- P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
- P309+P311: IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician
- P403+P235: Store in a cool and well-ventilated place
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
TOTAL LINDSEY OIL REFINERY ltd
manufacturer
DN40 3LW KILLINGHOLME UNITED KINGDOM
GB
+44 (0) 1469 563300
+44 (0) 1469 563766
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Carechem 24 International
+44 (0) 1235 239 670
GB
Languages: EN
for English speaking countries
Carechem 24 International
+ 33 1 49 00 00 49
FR
for Europe (in local languages)
Carechem 24 International
+ 44 (0) 1235 239 671
GB
for Africa and Middle East
Carechem 24 International
+ 86 10 5100 3039
CN
for China (to/from China)
Carechem 24 International
+ 86 532 8388 9090
CN
for China (within China)
Carechem 24 International
+ 65 3158 1074
SG
for Asia Pacific (Hong-Kong, Singapore, Taiwan, Philippines, India, Vietnam, Sri Lanka, Japan, Korea, Malaysia, Indonesia, Thailand)
National Poisons Emergency Number
0845 4647
GB
Official advisory body UK
National Poisons Information Centre
+ 00 353 (0)1 809 2566
IE
IRL
National Poisons Information Centre
+ 00 353 (0)1 837 9964
IE
IRL
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
SubstanceGeneral Composition
A complex combination of hydrocarbons produced by the distillation of products from a catalytic reforming process. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C12 and boiling in the range of approximately 30C to 220C (90F to 430F). It contains a relatively large proportion of aromatic and branched chain hydrocarbons. This stream may contain 10 vol.% or more benzene.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), catalytic reformed; Low boiling point cat-reformed naphtha EC: 273-271-8 | 68955-35-1 | 100% | ⚠️ Hazardous |
| Benzene EC: 200-753-7 | 71-43-2 | 30% | ⚠️ Hazardous |
| n-Hexane EC: 203-777-6 | 110-54-3 | 10% | ⚠️ Hazardous |
| Toluene EC: 203-625-9 | 108-88-3 | 3% | ⚠️ Hazardous |
| Pentane EC: 203-692-4 | 109-66-0 | 15% | ⚠️ Hazardous |
| 2-methylbutane EC: 201-142-8 | 78-78-4 | 15% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and keep at rest in a position comfortable for breathing. seek medical advice. if necessary, give oxygen if breathing has stopped: administer artificial respiration. Check for possible heart rate problems In case of complications: remove to hospital
🖐️ Skin Contact
Take off immediately all contaminated clothing wash skin as soon as possible with soap and water. Get medical advice if irritation persists.
👁️ Eye Contact
Do not wear contact lenses in any work area. flush immediately with plenty of water, holding the eyelids open Get medical advice (ophthalmologist)
🍽️ Ingestion/Swallowing
give nothing to drink and do not induce vomiting (risk of pulmonary aspiration). Risk of serious damage if inhaled into lungs, (caused e.g by vomiting), seek medical advice urgently. If swallowed, rinse mouth with water (only if the person is conscious)
🚨 Immediate Medical Attention Required
IN CASE OF HEAVY OR PERSISTENT DISTURBANCES, CALL A DOCTOR OR SEEK MEDICAL ADVICE URGENTLY
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
The substance is flammable and therefore the following conditions must be met to ensure safe use: Risks are controlled by storage and use under conditions which avoid all ignition sources.
🧤 Hand Protection
Gloves resistant to aromatic hydrocarbons. In case of immersion: recommended material: fluorinated polymer or polyvinyl alcohol, all thicknesses, penetration time according to norm EN 374-3 > 480 minutes. In case of contact with spray: recommended material: nitrile, layer thickness > 0,30 mm, penetration time according to norm EN 374-3 > 60 minutes. Remarks: Gloves may degrade in contact with this chemical. Carefully check the glove for cracks or damage before reusing it, dispose of gloves where the penetration time is exceeded. The penetration time depends on temperature, glove material, thickness and construction. Penetration time is measured against EN 374 in laboratory conditions corresponding to permanent static contact and is not necessarily representative of the risk in the workplace. Contact the gloves' supplier for further information on the selection and resistance of gloves.
👁️ Eye Protection
Goggles/spectacles. Do not wear contact lenses in any work area.
😷 Respiratory Protection
Local exhaust ventilation may be needed when working in a closed area. Wear suitable breathing equipment, in case of risk of exposure to vapour or fumes. If exposure is likely to exceed the occupational exposure limit, in a ventilated space, use an approved respiratory protective equipment; in confined space, use an autonomous breathing apparatus. Breathing apparatus A.
🦺 Skin/Body Protection
Shower and eye fountain available. Where exposure is likely, protective clothing must be worn including gloves. Safety non-slip shoes in areas where spills or leaks can occur. Safety shoes (keg / gas cylinder manipulation).
🌍 Environmental Exposure Controls
Handle in accordance with good industrial hygiene and safety procedures.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1268
📦 Proper Shipping Name
PETROLEUM DISTILLATES, N.O.S. ( Aromatic hydrocarbons)
⚠️ Transport Hazard Class
3
📋 Packing Group
I
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for NAPHTHA (PETROLEUM), CATALYTIC REFORMED?
The signal word for this substance is "danger".
What is the physical form of NAPHTHA (PETROLEUM), CATALYTIC REFORMED?
NAPHTHA (PETROLEUM), CATALYTIC REFORMED is a liquid with colourless to light yellow color. It has aromatic odor.
What is the solubility of NAPHTHA (PETROLEUM), CATALYTIC REFORMED?
Behaviour with water at 20C insoluble; Soluble in organic solvents, fatty substance
What is NAPHTHA (PETROLEUM), CATALYTIC REFORMED used for?
Manufacture of substance, Distribution of substance, Formulation & (re)packing of substances and mixtures, Synthesis intermediate product, Recommended to professional users
What are the hazard statements for NAPHTHA (PETROLEUM), CATALYTIC REFORMED?
This substance has 8 hazard statements: H224: Extremely flammable liquid and vapour H304: May be fatal if swallowed and enters airways H315: Causes skin irritation H336: May cause drowsiness or dizziness H340: May cause genetic defects H350: May cause cancer H361: Suspected of damaging fertility or the unborn child H411: Toxic to aquatic life with long lasting effects