Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Soft Clean spray
- Product Code
- 25250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent.
Manufacturers & Suppliers
VEIDEC AB
Videvågen 9, 247 64, Veberöd
+46 46 23 89 00
http://www.veidec.com
Emergency Contacts
Poison center
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Content in accordance with 648/2004/EC: >30 % aliphatic hydrocarbons.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C10, n-alkanes, iso-alkanes, cyclic (<0,1% benzene 71-43-2) EC: 927-241-2 | --- | 50 - 85% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 15 - 20% | Yes |
Notes
The full text for all hazard statements is displayed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air.
Symptoms: headache, fatigue, dizziness and nausea.
Rinse with water.
Rinse cautiously with water for several minutes.
Do not induce vomiting.
Immediate Medical Attention
Get medical attention if any discomfort continues.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special precautions.
For prolonged or repeated skin contact use suitable protective gloves. Suitable materials: Nitrile. Breakthrough time: 480 minutes. Thickness of glove material: 0,35 mm.
Under normal conditions of use eye protection is not required.
In case of inadequate ventilation use suitable respirator. ABEK
Not relevant.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not relevant.
Not relevant.
Not relevant.
Not relevant.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Soft Clean spray?
The signal word is danger.
What is the physical form of Soft Clean spray?
Soft Clean spray is a aerosol. .
What is Soft Clean spray used for?
Detergent.
What are the hazard statements for Soft Clean spray?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.