Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PS 250i
- Product Code
- PS 250i
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polishing agent
Manufacturers & Suppliers
Visomax Coating GmbH
manufacturer
Dachdeckerstr. 2-4, 97297 Waldbüttelbrunn
+49 (0) 931 452814 0
http://www.visomax.de
Emergency Contacts
Emergency Contact
+49 (0) 89 41407483
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 | --- | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Get medical advice/attention if you feel unwell.
After contact with skin, wash immediately with plenty of water and soap. Take off immediately all contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
Rinse immediately carefully and thoroughly with eye-bath or water.
Rinse mouth immediately and drink plenty of water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Wear protective gloves. Suitable material: NBR (Nitrile rubber), FKM (fluoro rubber). Thickness of the glove material: >= 0,5 mm Breakthrough time (maximum wearing time): >= 480 min In accordance with DIN EN 374. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye protection/face protection.
In case of inadequate ventilation wear respiratory protection. Filtering device (full mask or mouthpiece) with filter: A/P2
Wear suitable protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PS 250i?
The signal word is no signal word.
What is the physical form of PS 250i?
PS 250i is a liquid with white color. It has characteristic odor.
What is the solubility of PS 250i?
not determined
What is PS 250i used for?
Polishing agent
What is the melting point of PS 250i?
The melting point is not determined and the boiling point is - 100 C.