Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OKS 250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
OKS Spezialschmierstoffe GmbH
manufacturer
Ganghoferstr. 47, 82216 Maisach-Gernlinden, Deutschland
+49 8142 3051 500
Emergency Contacts
Emergency Contact
+49 8142 3051 517
24/7 service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium dihydroxide EC: 215-137-3 | 1305-62-0 | 10 - 20% | Yes |
| Amines, N-C16-C18-alkyl-(evennumbered, C18 unsaturated) propane-1,3-diaminium di[(9Z)-octadec-9-enoate] EC: 800-362-7 | --- | 2.5 - 10% | Yes |
| Distillates (petroleum), solvent-refined heavy paraffinic; Baseoil — unspecified EC: 265-090-8 | 64741-88-4 | 1 - 10% | Yes |
| Molybdenum trioxide, reaction products with bis[O,O-bis(2-ethylhexyl)] hydrogen dithiophosphate EC: 947-946-9 | --- | 0.25 - 1% | Yes |
| titanium dioxide; [in powder form containing <1 % of particles with aerodynamic diameter ≤ 10 μm] EC: 236-675-5 | 13463-67-7 | 20 - 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: Erythema
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Get medical attention immediately.
Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Obtain medical attention. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately if irritation develops and persists (skin). Get medical attention immediately (eyes). Obtain medical attention (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Exposure to decomposition products may be a hazard to health.
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ensure adequate ventilation. Do not breathe vapours, aerosols. Refer to protective measures listed in sections 7 and 8.
Do not allow contact with soil, surface or ground water.
Pick up and transfer to properly labelled containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not use in areas without adequate ventilation. Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Wash hands and face before breaks and immediately after handling the product. Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : butyl-rubber Break through time : > 10 min Protective index : Class 1 Remarks : Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.
Tightly fitting safety goggles
Not required; except in case of aerosol formation. Filter type : Filter type A-P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Air : Should not be released into the environment. Soil : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. Water : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
No conditions to be specially mentioned.
No materials to be especially mentioned.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (fatty amine derivative)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OKS 250?
The signal word is danger.
What is the physical form of OKS 250?
OKS 250 is a paste appearing as paste with white color. It has characteristic odor.
What is OKS 250 used for?
Lubricant
What are the hazard statements for OKS 250?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of OKS 250?
The melting point is No data available and the boiling point is No data available.