NextSDS Logo
Safety Data Sheet EN

Trionic D Cleaning & Disinfection Wipes

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Trionic D Cleaning & Disinfection Wipes
Product Code
EBW 50,125,200 & 300 DFEBW 125 & 200, GEBW200, EBW200S

Regulatory Identifiers

CAS Number
N/A

Identified Uses

A wet wipe for cleaning/disinfecting medical devices and equipment.

Manufacturers & Suppliers

E

Ebiox Ltd

manufacturer

822 Fountain Court, Birchwood Boulevard, Birchwood, Warrington, WA3 7QZ, UK

+44 (0) 1925 856271

Emergency Contacts

UK National Poisons Information Service

0870 600 6266

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not expected to present a hazard to the eyes under normal conditions of use but direct contact of the impregnating fluid with the eyes could cause transitory irritation.
Not expected to present an irritation hazard under normal conditions of use but prolonged contact with the impregnating fluid may cause irritation.
Not considered to present an inhalation hazard under normal conditions of use.
Not expected to present an ingestion hazard under normal conditions of use but ingestion of the impregnating fluid would cause irritation of the mouth and upper digestive tract.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

An aqueous solution of a proprietary blend of non-ionic and amphoteric surfactants, three cationic biocides which are listed in Annex II of Regulation (EC) 1451/2007 for Product Type 2, fragrance impregnated onto a nonwoven fabric.

Chemical Name CAS Number Concentration Hazardous
Didecyl dimethyl ammonium chloride 7173-51-5 1% Yes
C12/16 Alkyl dimethylbenzyl ammonium chloride 68424-85-1 1% Yes

CAS No: Not applicable, preparation is a mixture. EINECS No: Not applicable, preparation is a mixture.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

After prolonged contact with the impregnating fluid wash hands/skin with soap and water. If irritation develops seek medical advice.

Eye contact

Immediately flush with plenty of water for at least 15 minutes. If irritation develops seek medical advice.

Ingestion

Rinse mouth thoroughly with water. Do not induce vomiting. Seek medical attention.

Immediate Medical Attention

Seek medical attention if ingestion occurs. Seek medical advice if irritation develops after eye or skin contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray/fog, foam, carbon dioxide and dry powder.

Unsuitable media

Water Jet.

Specific hazards

In the event of a large fire toxic fumes containing oxides of carbon and nitrogen may be formed.

Firefighter Protection

Standard protective equipment should be worn by firefighters. In the event of a large fire, the use of a self-contained breathing apparatus is necessitated.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent entry of significant quantities of the impregnating fluid into drains and water courses

Cleanup methods

Absorb any impregnating fluid onto a suitable inert material, collect mechanically with spilled product for subsequent disposal and then rinse the area with water.

Materials: suitable inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid direct contact of the impregnating fluid with the eyes and prolonged contact with the skin.

Storage

Store under normal warehouse conditions.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Eyes

avoid direct contact of the impregnating fluid with the eyes

Skin/Body

avoid prolonged contact with the skin

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
Appearance
White nonwoven fabric impregnated with a clear liquid.
Partition Coefficient
---
Lower Explosive Limit
---
Ph
ca6.5
Form
nonwoven fabric impregnated with a clear liquid
Colour
White
Colour Intensity
---
Metal Corrosion
---
State Under Standard Conditions
---
Properties Status
---
Vapor Pressure
---
Freezing Point
---
Auto Ignition Temperature
---
Softening Point
---
Density
---
Evaporation Rate
---
Decomposition Temperature
---
Boiling Point
ca 100°C
Flammability
Impregnating fluid is non flammable
Physical State Data
solid
Solubility In Fat
---
Odor Threshold
---
Solidification Point
---
Molecular Weight
---
Cloud Point
---
Relative Density
---
Solubility In Water
completely miscible
Odor
Fragranced
Dynamic Viscosity
---
Kinematic Viscosity
---
Flash Point
> 100°C
Crystallisation Point
---
Solubility
Impregnating fluid is completely miscible with water
Voc Content
---
Upper Explosive Limit
---
Relative Evaporation Rate
---
Bulk Density
---
Melting Point
---
Explosive Limits
---
Physical State
White nonwoven fabric impregnated with a clear liquid.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

stable under normal conditions of storage/use

Incompatible

no chemical incompatibility is known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of the preparation according to local and national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This preparation is not classified as "Hazardous" for labelling purposes.

Chemical Safety Assessment Not performed

Contains amongst other ingredients Disinfectants, Parfum. Safety phrases: S (2) Keep out of reach of children, S 25 Avoid contact with eyes, S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Trionic D Cleaning & Disinfection Wipes?

The signal word is no signal word.

What is the physical form of Trionic D Cleaning & Disinfection Wipes?

Trionic D Cleaning & Disinfection Wipes is a white nonwoven fabric impregnated with a clear liquid. appearing as white nonwoven fabric impregnated with a clear liquid. with white color. It has fragranced odor.

What is the solubility of Trionic D Cleaning & Disinfection Wipes?

Impregnating fluid is completely miscible with water

What is Trionic D Cleaning & Disinfection Wipes used for?

A wet wipe for cleaning/disinfecting medical devices and equipment.

What are the hazard statements for Trionic D Cleaning & Disinfection Wipes?

This substance has 4 hazard statements:

  • Not expected to present a hazard to the eyes under normal conditions of use but direct contact of the impregnating fluid with the eyes could cause transitory irritation.
  • Not expected to present an irritation hazard under normal conditions of use but prolonged contact with the impregnating fluid may cause irritation.
  • Not considered to present an inhalation hazard under normal conditions of use.
  • Not expected to present an ingestion hazard under normal conditions of use but ingestion of the impregnating fluid would cause irritation of the mouth and upper digestive tract.