Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pal TX Surface Disinfectant Wipes
- Product Code
- Q / W20, W64, W65, W131, W233, W258, W410230
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning and disinfecting wipes for hard surfaces
Uses advised against
For professional users only
Manufacturers & Suppliers
Pal International limited
manufacturer
Bilton Way, Lutterworth, Leicestershire, LE17 4JA, United Kingdom
Emergency Contacts
Emergency Contact
+44 (0) 1455 555 700
GMT, English spoken, Mon-Fri 08.00 to 17.00
EN
Emergency Contact
+44 (0) 7725 204 194
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-(3-Aminopropyl)-N-dodecylpropane-1, 3-diamine EC: 219-145-8 | 2372-82-9 | 0.75% | Yes |
| Isotridecanol ethoxylated | 69011-36-5 | 0.2% | Yes |
| Alcohols, C12-14, ethoxylated, sulfates, sodium salts | 68891-38-3 | 0.2% | Yes |
| Lactic Acid EC: 200-018-0 | 50-21-5 | 0.2% | Yes |
Notes
For the full text of the H-statements mentioned in this section, see Section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Obtain medical attention for symptoms of difficulty of breathing
Symptoms: difficulty of breathing
IF ON SKIN: Rinse with plenty of water.
IF IN EYE: Rinse with plenty of water.
IF SWALLOWED: Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Obtain medical attention for symptoms of difficulty of breathing; Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In the event of fire, use specifically suitable extinguishing agents appropriate for the surrounding fire.
None known.
Keep away from heat and source of ignition.
Firefighter Protection
Use personal protective equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure cleanup is conducted by trained personnel. Stop any leak if safe to do so. Contain spillage and then collect with non-combustible absorbent material and place in container for disposal according to local / national regulation.
Do not allow contact with soil, surface or ground water.
collect with non-combustible absorbent material and place in container for disposal according to local / national regulation
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Pal TX Surface Disinfectant Wipes
---
Pal Surface Disinfectant Wipes
---
Pal TX Alcohol Free Disinfectant Wipes
---
Pal Disinfectant Wipes
---
Lysol Disinfecting Wipes
---
CloroxPro™ Clorox® Disinfecting Wipes
---
Medipal Chlorine Disinfectant Wipes
---
Trionic D Cleaning & Disinfection Wipes
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands thoroughly after use.
Keep away from oxidizing agents. Keep out of reach of children. Keep container tightly closed. Storage temperature: 0°C to 40°C
Handle in accordance with good industrial hygiene and safety practice. Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good ventilation should be sufficient to control worker exposure to airborne contamination.
No special protective equipment required.
No special protective equipment required.
No special protective equipment required.
Consider the provision of contamination around the storage vessels
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Extreme heat, flames and sparks.
None known.
Carbon oxides, Nitrogen oxides, Sulphur oxides, Oxides of phosphorus
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulation.
If recycling is not practicable, dispose of in compliance with local regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- Not applicable.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Avoid release to the environment.
Avoid release to the environment.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pal TX Surface Disinfectant Wipes?
The signal word is no signal word.
What is the physical form of Pal TX Surface Disinfectant Wipes?
Pal TX Surface Disinfectant Wipes is a wet nonwoven wipe material appearing as wet nonwoven wipe material with blue color. It has slight chemical odour odor.
What is the solubility of Pal TX Surface Disinfectant Wipes?
Solubility(ies)
What is Pal TX Surface Disinfectant Wipes used for?
Cleaning and disinfecting wipes for hard surfaces
What are the hazard statements for Pal TX Surface Disinfectant Wipes?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of Pal TX Surface Disinfectant Wipes?
The melting point is Melting Point/Freezing point and the boiling point is Initial boiling point and boiling range.