Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LubriFluid F100
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Universal lubricant for minimal-quantity lubrication purposes
Manufacturers & Suppliers
SKF Lubrication Systems Germany AG
manufacturer
Motzenerstr. 35/37, 12277 Berlin, Germany
49 (0) 30 72002-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Modified fatty media
Void
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Get fresh air, see a doctor in the event of complaints.
Wash off with large quantities of water and soap.
Hold lids open and rinse out eyes for several minutes with flowing water.
Consult a doctor if complaints persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, extinguishing powder or sand. Fight large fires with jets of water spray, take extinguishing measures that suit the respective environment.
Full water jet
Carbon monoxide (CO)
Firefighter Protection
When extinguishing: put on breathing apparatus that does not depend on the ambient air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow substance to get into the sewage system or open waters. Prevent spreading (e.g. by damming up or by oil booms). Do not let substance get into the soil/subsoil.
Mop up with liquid-binding material (sand, kieselgur, acid binders, universal binders, sawdust).
Materials: sand, kieselgur, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Observe all storage regulations. Protect from frost and direct sun light. Original containers to be kept dry and firmly closed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves and protective skin cream. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material: Nitrile: thrick 0,4 mm, break trough time > 240 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Not required.
Not necessary if room is well-ventilated.
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions known.
No decomposition if used as intended.
Strong oxidants.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Disposal must be made according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product has not been classified and marked in accordance with EU Directives / respective national laws. Observe the general safety regulations when handling chemicals
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LubriFluid F100?
The signal word is no signal word.
What is the physical form of LubriFluid F100?
LubriFluid F100 is a liquid with light color. It has characteristic odor.
What is the solubility of LubriFluid F100?
not miscible or only to slight extent
What is LubriFluid F100 used for?
Universal lubricant for minimal-quantity lubrication purposes
What is the melting point of LubriFluid F100?
The melting point is not determined. and the boiling point is not determined..