NextSDS Logo
Safety Data Sheet EN

STARKE REVOLUTION

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STARKE REVOLUTION
Chemical Name
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Exterior Detail Wax

Manufacturers & Suppliers

S

Starke Yacht Surface Technologies

distributor

17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912

+1 (800) 203-5315

Emergency Contacts

John Watkins

+1 (239) 851-6030

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304
Skin Irrit. Cat. 3 H316
Repr. Cat. 2 H361
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H304 May be fatal if swallowed and enters the airways.
H316 Causes mild skin irritation.
H361 Suspected of damaging fertility or the unborn child.
H410 Very toxic to aquatic live with long lasting effects.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash thoroughly with soap and water after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISOIN CENTER/doctor.
P308+P313 If exposed or concerned: Get medical advice/attention.
P331 Do NOT induce vomiting.
P391 Collect spillage.
P405 Store locked up.
P501 Dispose of contents/container to a licensed treatment, storage or disposal facility (TSDF).

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
PROPRIETARY ALIPHATIC WHITE SPIRIT EC: 265-150-3 64742-48-9 10 - 25% Yes
PROPRIETARY ALIPHATIC WHITE SPIRIT EC: 265-150-3 64742-48-9 10 - 25% Yes
OCTAMETHYLCYCLOTETRASILOXANE EC: 209-136-7 556-67-2 10 - 25% Yes
CYCLOPENTASILOXANE EC: 208-764-9 541-02-6 1 - 5% No
HYDROCARBONS, C13-C18, N- ALKANES, ISOALKANES, CYCLICS, < 2% AROMATICS EC: 928-253-0 --- 1% Yes
CMIT/MIT MIXTURE 55965-84-9 1% Yes

***** contains 3% Dimethyl Sulfoxide (DMSO)

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air at once.

Symptoms: None expected. However, high concentrations of vapors can cause drowsiness, dizziness, headaches, and nausea.

Skin contact

If irritation occurs and product is on the skin, rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water. If irritation, redness or swelling persists, contact a physician immediately.

Symptoms: May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.

Eye contact

If product gets in the eyes, flush with copious amounts of lukewarm water for at least 15 minutes. If irritation occurs, contact a physician.

Symptoms: Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.

Ingestion

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person.

Symptoms: If product is swallowed, may cause nausea, vomiting and/or diarrhea. Nausea, intestinal discomfort, vomiting and/or diarrhea.

Immediate Medical Attention

Contact the nearest Poison Control Center or local emergency number. If eye irritation occurs, contact a physician. If skin irritation, redness or swelling persists, contact a physician immediately.

Medical Treatment

Contact a physician if irritation occurs or persists.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate local exhaust ventilation on open containers. When using keep the product moist at all times. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

Hands

AVOID SKIN CONTACT . Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.

Eyes

AVOID EYE CONTACT . Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.

Respiratory

Avoid breathing of vapors, mists or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

Skin/Body

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA. (Also, protective clothing is mentioned under hand protection to prevent skin contact).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
100C (212 F)
Solubility
ND
Form
viscous liquid
Voc Content
---
Odor Threshold
---
Solubility In Fat
---
Dynamic Viscosity
---
Colour Intensity
---
Cloud Point
---
Physical State
liquid
Appearance
Off-white viscous liquid
Auto Ignition Temperature
325C (617F)
Odor
Sweet odor
Solubility In Water
---
Lower Explosive Limit
0.7 vol%
Softening Point
---
Relative Density
0.99 g/cm [3] @ 25C
Properties Status
---
Evaporation Rate
---
Ph
7-9
Explosive Limits
---
Metal Corrosion
---
Physical State Data
liquid
Flammability
---
Molecular Weight
---
Flash Point
- 100C (> 212F)
Melting Point
---
Solidification Point
---
Crystallisation Point
---
Upper Explosive Limit
5.4 vol%
State Under Standard Conditions
---
Decomposition Temperature
---
Partition Coefficient
---
Vapor Pressure
132 Pa at 25C
Bulk Density
---
Density
---
Kinematic Viscosity
---
Colour
Off-white
Relative Evaporation Rate
---
Vapor Density
---
Freezing Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for STARKE REVOLUTION?

The signal word is danger.

What is the physical form of STARKE REVOLUTION?

STARKE REVOLUTION is a liquid appearing as off-white viscous liquid with off-white color. It has sweet odor odor.

What is the solubility of STARKE REVOLUTION?

ND

What is STARKE REVOLUTION used for?

Exterior Detail Wax

What are the hazard statements for STARKE REVOLUTION?

This substance has 4 hazard statements:

  • H304: May be fatal if swallowed and enters the airways.
  • H316: Causes mild skin irritation.
  • H361: Suspected of damaging fertility or the unborn child.
  • H410: Very toxic to aquatic live with long lasting effects.